Leaderboard
Popular Content
Showing content with the highest reputation on 09/21/2020 in all areas
-
Thank you very much everyone. Maybe I shouldn't have posted that here but frankly I'm very upset. This photo is from last year doing two laps around the island: it's how I want to remember him.9 points
-
6 points
-
6 points
-
Here is my T2 power supply, now with Pro Bias Maida regulator style. The small board with three blue filter capacitors is the 21st Century Maida Regulator by Tom Christiansen producing 580 volts after change of resistor. The Maida regulator replaces the 10m90s current source with Zener string and filters. I feed the regulator with unregulated 660 VDC. Only 5.1M resistor on psu board is used. Works great. P.S. still need some wire clean up… will probably never happen5 points
-
2 points
-
low voltage transformer 52mm high 105mm diameter ( I like to run the heaters at a bit under 6.3V AND in my experience the transformers I buy provide a little more voltage than the specs) 2x 4.5A @ 6V for el34s 2x 1.5A @ 6V for 6922s 2x 0.4A @ 15V for balance servo, HV delay circuit and delay relay high voltage 65mm high 125mm diameter (voltages are the same as the psu board silkscreen.) 2x 0.15A @ 260V for +250, -260VDC 2x 0.15A @ 450V for +-500VDC 1x 0.15A @ 465V for -560VDC Both transformers have magnetic shields, electrostatic shields and thermal resettable fuses. transformer manufacturer Mueller rondo in germany http://www.mueller-rondo.com/kontakt.htm With postage and vat slightly under 200 euros for the pair. I like seperate HV and LV transformers so I can run the heaters and LV at full voltage and slowly bring up the HV on a variac when I am doing initial testing. It also offers the chance to easily reuse the LV transformers in other valve amps.1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
Sorry to hear Jose.... What a great picture, though! It's clear how close you and Sargent are.....1 point
-
More difficult than I imagined. Three very different acoustic amps, only one of which had a line out, so I ended up recording with my contraption mic around 8 feet back and one line out feed from the lead guitarist. All outside on the island, while major construction was taking place on a rock wall behind the beach. Vocals suck but I think the guitars are okay.1 point
-
1 point
-
This may be the worst of what 2020 has to offer given the lasting impact this could have on our highest court.1 point
-
As a Pink Floyd fan, with my favorites being mostly pre-1972, this is just fantastic (that is really what I think! 😄)1 point
-
It is the album that I like the most by Tonbruket. I admit that I don't like Dan Berglund's solo work as much as Magnus Ostrom's1 point
-
1 point
-
0 points
-
I had to say goodbye to a good friend before he was completely sedated. In a few days he will rest in peace. Fucking cancer. Good bye Sargent. Always on the wheel !!!!0 points
-
Fuckkkkkkkkkk. RIP to a great woman. I can't wait to read Associate Justice Ted Cruz's nuanced opinions.0 points