Leaderboard

I was leaning towards the spindle; but as I have no idea at this point if I will ever figure out how to work this thing, I went with a spare router for the moment. The neighbors are both deaf, but Kasia works 12 hours a day, everyday on phone calls so it might be problematic.

Besides the different colour, it's interchangeable. Or if it is still in one piece, you can just shorten it, this was done on mine recently, worked just fine.

Ukraine Army destroys command operations center of the 49th Combined Arms Army of the Russian Armed Forces, eliminates two Russian generals. I've lost count of how many Russian generals have died during this special military operation, which is going totally to plan.

Happy 100th birthday to Charles Mingus!

Freddie wasn't too shabby at Live Aid, either. And as I remarked to Joanne, both concerts were before the invention of auto-tune, so the singers could actually, you know, sing.

Learned how to engrave with my milling machine today. It's an original Kevin Gilmore et. Al. DIY T2 amplifier with original parts.

Thanks for your posts guys. My question was a leading one in an attempt to have simple and direct parts list for builders that may be very skilled in building equipment but may not have a high level of understanding of schematics or circuits. I was hoping someone would come up with a little table like the following. ((R8 + R7) / R7) x 10 ((1.5 + 1.5) / 1.5) * 10 = 20v ((2.21 + 1.5) / 1.5) * 10 = 24.7v ((3 + 1.5) / 1.5) * 10 = 30v R7 = 1K5 R8 = 1K5 for 20V R8 = 2k21 for 24.7V R8 = 3K for 30v R9 = R7 R10 = R8

Holy fuck, what a pain in the balls. Finally got all four bolts out since this piece has to come off for the new spindle mount. The last bolt would not move with heat, mallet, etc. and the impact was just going to round it out. Ended up having to use a rubber mallet on the router mount to twist it around and finally broke the last bolt loose.

The issue is, the bolts are four inches long and only the last 3/4” of an inch is threaded. I would have had to heat up the housing. After breaking 3 Allen wrenches I got a long ass one and a rubber mallet and went to town. Got it in but what a shitty fucking design.