Jump to content

Lil Knight

Returning Member
  • Posts

    297
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Lil Knight

  1. Those are only top panels. Mounting holes will be there.

     

    Yes, traffos from SumR will fit. New PSU board is a bit shorter too.

     

    I got some more expensive trimmers from Bourns already. Just haven't got time to try them... More than $200 just for the trimmers doesn't sound good though. Measure the resistance and replace with fixed resistors is another option.

     

    No, the volume knobs will be 'standard'. The extended rod will be through the panel bearing.

  2. Some updates...

     

    10013758654_d1e6c91acb_c.jpg

     

    The board's thickness will need more time to fully solder the thing. You don't want to de-solder anything though...

     

    I've come up with what I think final design for the top and bottom plates.

     

    10013817893_2f0a8b1cb5_b.jpg

     

    10013681584_8cd4fe213a_b.jpg

     

    Bottom and top plate of the PSU will be the same. I wanted to add more venting holes but afraid it will not be strong enough to hold everything.

     

    Small parts such as tube rings and volume knobs are already in production yesterday.

     

    I am thinking of making a small badge made of stainless steel, and then a layer of leather with laser engraved logo on top of the amp.

    Lots of options for leather, will get back with this later.

  3. Just got back from a short vacation... sorry for any delay.

     

    The boards arrived yesterday. The extra thickness is just awesome, bullet-proof is all I could say. Will try to take some pics later on :)

    A very helpful delivery man did manage to drop the whole box and damage the corners of the boards a bit :-/

     

    I will bring a set of them to the machine shop and begin to sketch up the chassis this weekend.

  4. I am ordering from satodenki soon, so anyone needs anything from there, just let me know via PM. I will finalize things on Thursday.

     

    To make it easier, here are the required parts for the T2 that are available from them:

     

    34  2sa1486  8  2sk216  4  2sk246gr  4  2sj79 
  5. If you look back some pages, you could see me own cases. These would basically look like that, with some minor/major changes... The top plates will have lots of punched venting holes. The front panels, not sure yet.. how many jacks you guys want? I am thinking of one jack on the right, volume knob in the middle, and 5mm LED on left. Power switch on the PSU's front or just blank? If yes, which type? I do know place in China that sells latching switch, rated 5A. These switches are made of anodized aluminum, not cheap plastic ones on fleabay or PC-related sites.

     

    These are the volume knobs, spikes (optional, either stainless steel or anodized aluminum) and decorative tube rings that I am going to use.

     

    9609180336_57f7904dd5_c.jpg

     

    9609193694_09fea32a82_o.jpg

  6. I finally got details from the machine shop and these are the info. Participants please let me know your decision soon so that I could finalized the quantity.

     

    + chassis will be 400mm long (15.75") and 77mm (3") tall.

    + all will be black anodized, instead of powder coating as aforementioned.

    + top and bottom panel are 3mm thick

    + front panel 10mm thick

    + punched venting holes

    + laser engraving on front panel. silkscreen on rear panel.

    + all stainless steel socket head screws

    + all holes machined

    + custom machined decorative tube rings

    + (optional) custom stainless steel spikes

     

    Estimated cost for 15 sets (amp+psu) would be $1,180 each.

     

    Also, the new boards would be 3mm thick, 4oz copper, blue soldermask and gold-plated through holes. Each set is $190.

     

    So we are at $1,370 in total before shipping and fees.

     

    The boards needed to be fabricated first, which takes 3-4 weeks. Then the chassis will be in production which is another 6 weeks.

    So it would be 10-12 weeks total. I really hope to ship before the year's end though.

     

    Optional stuff:

    + Stainless steel spikes.

    9564881394_d0a928c043.jpg

     

    + Teflon tube sockets

    + Parts from satodenki, depending on stock.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.