Jump to content
kevin gilmore

krell ksa5 klone

Recommended Posts

Inu    29

Schematic:

Q2(Q7) Collector -  Q12(Q13)Base

Board:

Q3(Q8) Collector - Q12(Q13)Base

 

IN2 only (IN1 is OK)

Schematic:Q14,23&24 MJE15030 

Board:MJE15031

 

Schematic:Q25&26 MJE15031

Board:MJE15030

 

+/-22V line (or +/- 21V?)

4.7uF/63V are not on the schematic

 

Q27 Collector

0.1uF is not on the schematic

Edited by Inu

Share this post


Link to post
Share on other sites
kevin gilmore    995

Thanks, got all of them. Not sure yet about q27 collector cap.

The 4.7uf caps are at birgir's idea. (also kind of expensive)

evidently no amp is complete without some wima's.

will post again when i get home.

Share this post


Link to post
Share on other sites
kevin gilmore    995

updated schematic and picture, have a look.

 

very pathetic BOM in progress

includes some of the power supply

 

1000uf 35v ls=5 dia=13mm 871-B41041A7108M000 35 0.47 16.45
.1uf 100v ls=5mm 80-R82EC3100DQ70J 14 0.32 4.48
4.7uf 63v wima 505-MKS24.7/63/5 7 4.33 30.31
470pf 500v  ls 5.9mm 5982-15-500V470 4 2.28 9.12
39pf 500v ls 5.9mm 598-CD17ED390JO3 2 1.35 2.7
220pf 500v ls 5.9mm  598-CD15FD221JO3F 2 1.22 2.44
    
220uf 50v ls 5mm dia 10mm 647-UPW1H221MPD 4 0.58 2.32
4700uf 50v ls10mm 35 dia 598-SLP472M050C5P3 2 3.2 6.4
    
mjf15030  6 1.63 9.78
mjf15031  4 1.63 6.52
heatsink amp board 513102b02500g 8 1 8
mpsa56  19 0.12 2.28
mpsa06  23 0.32 7.36
lsk389  2  
relay 653-g5v-2-h1-dc24 2 2.76 5.52
op27 digikey 4 6.01 24.04

 

Its about $137 not including the resistors and some of the

other power supply components. So definitely under $250

with transformer and everything.

 

Unless you go very nuts on the resistors.
 

Edited by kevin gilmore

Share this post


Link to post
Share on other sites
Inu    29

Zettler 24V Relay

A2830-2C-24DS

http://www.bgmicro.com/REL1086.aspx

MPS8099 and 8599 (0.15)

http://www.bgmicro.com/TRNMPS8099.aspx

http://www.bgmicro.com/TRNMPS8599.aspx

 

 

It is hard to pairing MJEs…    :-[

 

MJE15030G(NPN)

Lot:AFA50

hfe = 78 78 80 83 96 97 98 104 104 105 107 109 111 114

 

MJE15031G(PNP)

Lot: AFB09

hfe = 228 234 238 241 242 252 253 257 260 262  

Edited by Inu

Share this post


Link to post
Share on other sites
spritzer    1,444

The amp board is just about ready so I'll probably be ordering prototypes before Christmas.  :) 

Share this post


Link to post
Share on other sites
kevin gilmore    995

what we need to do is find a massive stock of 1000uf/25v blackgate non-polarized caps.

 

The only place that has them in stock wants $80 each and we need 35 per board.

Edited by kevin gilmore

Share this post


Link to post
Share on other sites
c12mech    17

what we need to do is find a massive stock of 1000uf/25v blackgate non-polarized caps.

 

The only place that has them in stock wants $80 each and we need 35 per board.

 

Soooo...for about 10x the price of the amp I could have it all Blackgated up? :blink: :blink:

 

Even if I wanted to go nuts with it, there is no way I could pull the trigger on that.

Share this post


Link to post
Share on other sites
spritzer    1,444

Yeah sane thing here.  I'll just stick with the Panasonic's and waste the rest of the money on the Megatron PCB heading my way... ;D

Share this post


Link to post
Share on other sites
spritzer    1,444

I still think Krell just had a few thousand of those CDE caps sitting there and decided to cram the amp full of them... :laugh:

Share this post


Link to post
Share on other sites

I just order all the components and the PCB to make one ::)

I will use Nichicon FG series for the 1000uF/35V condensators. Great value for the money... Not so good as the Blackgate or Elna Silmic II, but much cheaper !

I Let you know if the name of Krell is as great as it should be :indra:

Share this post


Link to post
Share on other sites
Bidoux    10

I know the goal here is to clone the krell but I am curious ; would it work to split R15 and put an integrator's output in the middle, dynalo style ? Requires to modify the servo and get rid of C10, C18 and C19 ...

Share this post


Link to post
Share on other sites
spritzer    1,444

Some progress:

 

vqi0JSWh.jpg

 

I didn't order the PSU boards as they were never 100% finalized.  A Sigma22 works just as fine for testing though. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×