fishski13 Posted December 26, 2013 Report Share Posted December 26, 2013 If its any help (or not) I really like the CKK-III as a project for further down the road. On many levels its a shame that it gets passed over for the b22 so often. agreed. can drive drive any sensible HP without issue and sounds fantasic. don't skimp on pot/SA. silly cheap and an amp that sounds good with every thing. Quote Link to comment Share on other sites More sharing options...
bhjazz Posted December 26, 2013 Report Share Posted December 26, 2013 If its any help (or not) I really like the CKK-III as a project for further down the road. On many levels its a shame that it gets passed over for the b22 so often. Also post an "agree" as well. Fairly easy to stuff the board, and nothing really to tweak once done. Save this for your next build. I still use mine a lot! Quote Link to comment Share on other sites More sharing options...
anetode Posted December 26, 2013 Report Share Posted December 26, 2013 SSRs don't like inductive loads. The results are transformers that buzz. There were a few threads somewhat acknowledging the issue but in the end, whether the relay is zero - crossing or rated to 50x the needed current, removing the SSR results in quieter transformers. Just use a normal relay, there are only drawbacks to SSRs and no benefits. What about Random Turn On SSRs? Quote Link to comment Share on other sites More sharing options...
luvdunhill Posted December 27, 2013 Report Share Posted December 27, 2013 (edited) No idea. What about a mechanical relay? Edited December 27, 2013 by luvdunhill Quote Link to comment Share on other sites More sharing options...
MASantos Posted January 8, 2014 Report Share Posted January 8, 2014 Also post an "agree" as well. Fairly easy to stuff the board, and nothing really to tweak once done. Save this for your next build. I still use mine a lot! Agree as well, can be built under 200$ and sounds great! Makes a great preamp too! Quote Link to comment Share on other sites More sharing options...
sbelyo Posted March 24, 2021 Report Share Posted March 24, 2021 If you want to go the cmoy route, try this https://jdslabs.com/product/cmoybb-v203r-pcb-rechargeable/ They have a parts list, assembly manual and even a template to help you line the holes up on the tin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.