Jump to content

2018 PCB Group Buy with TKD pots


sbelyo

Recommended Posts

Never thought what I'm going to say it but I'm feel really confused. Can you clarify some (or way too many) positions

1. GRLV - can point the thread for it

2. GRHV = PS for electrostatic

3. CFA - can point the thread for it

4. Dynalo mini tkd pcb - what for?

5. Grounded grid pcb - what for?

6. TKD 4CP-601 10K   Is it right for enclosure GB?

7. rectifier board What for?

8. Alps tkd boards what for?

9. That340 adapters what for?

I plan to work on projects summer and not sure if I missed something to order

 

Link to comment
Share on other sites

Never thought what I'm going to say it but I'm feel really confused. Can you clarify some (or way too many) positions
1. GRLV - can point the thread for it
2. GRHV = PS for electrostatic
3. CFA - can point the thread for it
4. Dynalo mini tkd pcb - what for?
5. Grounded grid pcb - what for?
6. TKD 4CP-601 10K   Is it right for enclosure GB?
7. rectifier board What for?
8. Alps tkd boards what for?
9. That340 adapters what for?
I plan to work on projects summer and not sure if I missed something to order
 

You can find most of these in the DIY section. Some hints on ones that won’t be obvious:
3. And now for something completely different
4. Dynalo Mk2, mini version (no sep thread for this one)
6. Std pot for Dynalo Mini, but can be used for many balanced amps
7. Schottky discrete rectifier board (GRLV)
8. Pot board with Phoenix and Molex KK connectors. Will work for Alps RK27 (blue), TKD 2/4CP 601 and 2500 pots
9. Use discrete transistors or FETs instead of the THAT340 chips in amps that use them


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

2 hours ago, vladco said:

Thanks for the answers. If not too late can you bump me for 1 dynalo mini, 4 rectifier board and 4 that340 boards.

you're all set

Also, I sent the final numbers off to sellmark for the pots.  That combined with I forgot to attach 2 boards to the email quote request have delayed the price totals.  Should be up there in a day or two.

Link to comment
Share on other sites

The prices are in for everything except the THAT340 boards.  I miscalculated the amount so needed to quote them again.  Waiting on the final prices to come from sellmark for the pots.  Should be close to what I posted earlier.  I'll start to collect payment once they're in.

 

Just a note, the that340 boards will be two each of the four different boards.  So eight total boards per set

Edited by sbelyo
  • Like 1
Link to comment
Share on other sites

7 hours ago, navigator said:

Reading the other threads in the last weeks, may I still add a Dynalo Mini + TKD pot? I did not touched the chart, may I add it?

Thanks!

You're good.  I added it for you.  Pars didn't need a pot so you got his

Link to comment
Share on other sites

1 hour ago, Pars said:

^ ouch! Those are expensive for what they are! I’ve already got what I might need from my last order from seeed, so I may drop those...


Sent from my iPhone using Tapatalk

Sorry Steve but I´m not sure. 1 set is 8 pieces?

If it´s ok. I would like change my order If it´s not a problem,  I would like only 2 set´s and add one unbal/bal tube. 

 

Link to comment
Share on other sites

8 hours ago, Tinkerer said:

Boy, those HV900 wound up being pricey but if they're done right, it will be worth it. Kinda surprised nobody else jumped in for even one set since the original run was around a dozen folks IIRC.

Given the fixed setup cost, you might want to ask @sbelyo to get a quote for 2 or 3 sets rather than just 1 set.  Price will only go up marginally, and you could probably sell the others later.  Or keep them in case one or two boards blow up and need to be rebuilt!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.