mwl168 Posted April 8, 2020 Author Report Share Posted April 8, 2020 Table updated. 1 Quote Link to comment Share on other sites More sharing options...
mwl168 Posted April 8, 2020 Author Report Share Posted April 8, 2020 Table updated. Received all but one payments. I have proceeded to contact PCBnet to place our order. 3 Quote Link to comment Share on other sites More sharing options...
mwl168 Posted April 10, 2020 Author Report Share Posted April 10, 2020 Table updated. This GB is now officially closed. Submitted latest version Gerber files and corresponding final quantities to the fab house. Will update with ETA of manufactured boards when I receive confirmation. 3 1 Quote Link to comment Share on other sites More sharing options...
tomislavkufrin Posted April 16, 2020 Report Share Posted April 16, 2020 (edited) Question about MATE_N_LOK connectors from the Main PSU board BOM. Pitch = 4.14 mm? This one as a 2 pin example https://www.te.com/usa-en/product-1-770872-0.html Edited April 16, 2020 by tomislavkufrin Quote Link to comment Share on other sites More sharing options...
mwl168 Posted April 16, 2020 Author Report Share Posted April 16, 2020 (edited) Received confirmation from the fab house that our orders are in production (each distinct Gerber file is considered one order). I've opted for boards to be shipped to me in batches when they are ready so we are not all held up by the partially assemble GRHV boards which will take longer than the rest of the PCBs. Edited April 17, 2020 by mwl168 5 2 Quote Link to comment Share on other sites More sharing options...
mwl168 Posted April 25, 2020 Author Report Share Posted April 25, 2020 (edited) Look what I just found at my door step... Edited April 25, 2020 by mwl168 10 1 Quote Link to comment Share on other sites More sharing options...
Kerry Posted April 25, 2020 Report Share Posted April 25, 2020 Quote Link to comment Share on other sites More sharing options...
G600 Posted April 26, 2020 Report Share Posted April 26, 2020 Brilliant! Quote Link to comment Share on other sites More sharing options...
mwl168 Posted April 29, 2020 Author Report Share Posted April 29, 2020 (edited) Updated GR78 and GR79 BOM in the first post to correct the C5 (47 pf) part number from 1206 to 0805. The 1206 package may fit but more difficult to solder. Edited April 30, 2020 by mwl168 Quote Link to comment Share on other sites More sharing options...
mwl168 Posted April 30, 2020 Author Report Share Posted April 30, 2020 More goodies showed up last night but with some bad news. The PSU main PCB came in 1.6mm/3oz copper instead of 2mm/3oz copper specification. There was a miscommunication that neither I or PCBnet caught until now - the order submitted specified 2mm thickness an 3oz copper but the quote was for 0.62' and 3oz copper and manufactured accordingly. I noticed this discrepancy when I took the PCBs from their wrapping to take some photos. The mini T2 boards are 2mm/3oz copper as ordered. All the PCBs look great with a nice heavy feel to them and are very good quality as can be expected from PCBnet. I have contacted PCBnet to see what can be done to resolve the issue. 6 Quote Link to comment Share on other sites More sharing options...
Blueman2 Posted April 30, 2020 Report Share Posted April 30, 2020 @mwl168, I would not think that would be an issue for the PSU main boards. It would definitely be an issue for the mini-T2s, but it sounds like those came in as 2mm. So speaking for myself, I am fine with the 1.6mm PSU main boards. 4 Quote Link to comment Share on other sites More sharing options...
JoaMat Posted May 1, 2020 Report Share Posted May 1, 2020 I’ve been using 1.6mm/1oz boards for some years now and I believe they are sufficient in most cases. James (jamesmking) has built one mini T2 and I’ve built two with 1.6mm/1oz. Quote Link to comment Share on other sites More sharing options...
MLA Posted May 1, 2020 Report Share Posted May 1, 2020 With Blueman2 on this; not an issue for me. Quote Link to comment Share on other sites More sharing options...
judo Posted May 1, 2020 Report Share Posted May 1, 2020 agree Quote Link to comment Share on other sites More sharing options...
jamesmking Posted May 1, 2020 Report Share Posted May 1, 2020 (edited) On 5/1/2020 at 10:43 AM, JoaMat said: I’ve been using 1.6mm/1oz boards for some years now and I believe they are sufficient in most cases. James (jamesmking) has built one mini T2 and I’ve built two with 1.6mm/1oz. I built two mini t2s, I always build in pairs or they get lonely... there is a bit or board flex when inserting or removing valves, (the ptfe sockets I have grip very tightly). No issues I can see with 1.6mm and 1oz, that's what I have used for all my builds, (4 dual output GRHV boards, 2 single output GRHV boards, 7 GRLV boards, 12 synchronous rectifiers, 4 diamond buffers, 4 blue hawaii amp boards, 4 alpha centauri amp boards and 2 alpha centauri psu boards).. Edited May 5, 2020 by jamesmking Quote Link to comment Share on other sites More sharing options...
HatIsMyFriend Posted May 1, 2020 Report Share Posted May 1, 2020 Since the mini T2 boards seem to be correctly at 2mm, I don't think board flex will be a problem when changing tubes around. I'm fine with 1.6mm for the PSU. Quote Link to comment Share on other sites More sharing options...
Blaino Posted May 5, 2020 Report Share Posted May 5, 2020 It's the thickness of the board not the thickness of the trace which is 3oz copper. There shouldn't be an issue with handling mechanical stress in this application as the PS board. I am not in the habit of bending my PC boards to see how they flex. It's not an issue as far as I am concern. Quote Link to comment Share on other sites More sharing options...
randytsuch Posted May 5, 2020 Report Share Posted May 5, 2020 If you would not have posted about it, I'd have never known the PS board was supposed to be thicker. So no problem for me either. A little board like that will be plenty stiff at 062 Quote Link to comment Share on other sites More sharing options...
Kerry Posted May 6, 2020 Report Share Posted May 6, 2020 I found an old picture of the PSU main board configured for a Carbon build. No external current regulators with jumpers installed in R34/R35... Quote Link to comment Share on other sites More sharing options...
mwl168 Posted May 6, 2020 Author Report Share Posted May 6, 2020 Got good news from PCBnet - they will remanufacture the PSU main boards to the spec'ed 2mm thickness. Expect to be shipped next week. PCBnet has truly been a top notch company to do business with. Their product quality and customer service have both been excellent! 6 1 Quote Link to comment Share on other sites More sharing options...
Blueman2 Posted May 6, 2020 Report Share Posted May 6, 2020 Great news. Definitely love PCBnet. Top notch organization. Quote Link to comment Share on other sites More sharing options...
jose Posted May 7, 2020 Report Share Posted May 7, 2020 Thanks Mwl168. Quote Link to comment Share on other sites More sharing options...
mwl168 Posted May 15, 2020 Author Report Share Posted May 15, 2020 Just got these in... 7 Quote Link to comment Share on other sites More sharing options...
Pars Posted May 15, 2020 Report Share Posted May 15, 2020 (edited) R4 and R6 are crooked... tsk tsk.. EDIT: j/k BTW, they look great! Edited May 16, 2020 by Pars 1 4 Quote Link to comment Share on other sites More sharing options...
Kerry Posted May 15, 2020 Report Share Posted May 15, 2020 Nice Thanks Michael! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.