Jump to content

Woodworkers of Head Case unite!


Recommended Posts

7 hours ago, swt61 said:

If you get really wet, then park your car on it. Worth a try.

Just re-read. I wasn't suggesting a wet t shirt contest. Get the board wet, not yourself. 

But Nate is right.

Link to comment
Share on other sites

Milo & Otis took a big step towards enclosing the new shop today. We framed two of the three walls with rough openings for double doors and a 4x4 window. All studs are old growth straight grain Douglas Fir that I salvaged from the house my brother is about to tear down. Straight and sound and fun to work with. Tomorrow we will build the third wall on the floor and then plop it into place with the sheathing and clapboards already on it because there is no room to work between the rock wall and the framing over on that side.





  • Like 11
Link to comment
Share on other sites

It's such a treat to work with straight and true lumber again, and normally I don't like anything straight. 😋

I also like that it's going to look like it's always been that way. And if the shop ever goes away, we can just cut a door into the back wall, because there's a bedroom and full bath behind the garage. Put in a kitchenette, and you have another goldmine Fairfax rental.

Or put an aging Carpenter up in his old age. 🤪

  • Like 2
  • Haha 2
Link to comment
Share on other sites

3 hours ago, Voltron said:




2 hours ago, swt61 said:

It's such a treat to work with straight and true lumber again

A nice trick - soft wood is plain sawn from trees just big enough to yield a 2x12. The 2x12's are taken across the middle with the 2x4's from the edge. Those edge pieces are the most likely to warp, but if you take a 2x12 and turn it into 3 2x4's, the two from the outside edges are effectively quarter sawn and are much more likely to be stable.



  • Like 3
Link to comment
Share on other sites

I've a similar cyclone (mine is plastic) bolted to the side of my shop vac. Amazing thing - all the machine tool shavings, including fine dust, end up in the cyclone, and nothing in the shop vac. So the filters in the vac don't get blocked up, and it retains maximum suction.

But mine is passive. Yours seems to be a powered one?

Yup - same make as yours but this one https://www.oneida-air.com/dust-deputy-deluxe-cyclone-separator-kit

Edited by Craig Sawyers
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...