Jump to content

Dynamight question


humanflyz
 Share

Recommended Posts

Hey Guys:

I have a chance to get a pretty good deal on a SFT built Dynamight from a person that I've known for a long time and trust. The only issue that he has disclosed to me about the amp is that on the lowest gain setting, there is some crackling when changing the volume on the stepped attenuator. But on all other gain settings, there is no crackling.

Is this something of a major concern? Because I don't anticipate on using the lowest gain setting, having heard this amp before. Thanks.

Link to comment
Share on other sites

I would leave it on a voltage gain of ten and not worry about it.

Or if you insist on much less gain, you need to add a resistor to

ground at the output of the attenuator for each channel.

I had the same issue with a low gain setting on my Dynamite.

Upping the gain to 10 helped.

Also had to redo my grounding scheme (lift the grounds from the xlr inputs) to get rid of the remaining small amount of scratchiness in the pot.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...