ph0rk Posted January 7, 2009 Report Share Posted January 7, 2009 A week or two ago I snagged a used GS-1 from HF (from doobooloo). It arrived and I let it adjust to room temp before firing up, and all seemed well until the left channel cut out almost completely. Flipping the high/low gain switch seemed to almost fix it. I contacted doobooloo and he said that it was a common problem with some GS-1's with the DACT stepped attenuator, and that popping the lid and reseating the molex-like connector for the left channel at the DACT SA would fix it. It did... for about 10 days. I noticed it again today, and so I popped the lid and reseated again. The molex connector grips firmly and none of the pins seem to have any play. So... is there any goop I can slather on the pins or the connector for a more permanent solution? I doubt I can vibration-proof my apartment. (And certainly not my desk. Undergrads make me pound it with my fist at least once per week). Quote Link to comment Share on other sites More sharing options...
grawk Posted January 8, 2009 Report Share Posted January 8, 2009 You could call justin Quote Link to comment Share on other sites More sharing options...
n_maher Posted January 8, 2009 Report Share Posted January 8, 2009 I would recommend contacting Justin as well, could be he knows more about the GS-1 than doosik. Quote Link to comment Share on other sites More sharing options...
justin Posted January 8, 2009 Report Share Posted January 8, 2009 I've had 1 sent back to me for this. Try adding some hot glue to the connector Quote Link to comment Share on other sites More sharing options...
ph0rk Posted January 8, 2009 Author Report Share Posted January 8, 2009 I probably shouldn't have used the word common, as I don't think I've never read anything else about it. I'll try the hot glue if it pops up again, thanks! Quote Link to comment Share on other sites More sharing options...
JBLoudG20 Posted January 8, 2009 Report Share Posted January 8, 2009 Justin is so dreamy Quote Link to comment Share on other sites More sharing options...
Smeggy Posted January 8, 2009 Report Share Posted January 8, 2009 Justin is so dreamy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.