Jump to content

Luxman P1u


Recommended Posts

11b07cca.jpg

89eb9d84.jpg

Continual effective output 2W+2W/8Ω, 1W+1W/16Ω, 500mW+500mW/32Ω and 27mW+27mW/600Ω

Input sensitivity/input impedance

unbalanced: 1.0V/26KΩ and balanced: 1.0V/67KΩ

Total harmonic distortion 0.0025% (1KHz), 0.02% (20Hz~20KHz)

Frequency range 20Hz~20KHz (+0, - 0.1dB), 5Hz~170KHz (+0, - 3.0dB)

Signal-noise ratio 115dB (IHF-A)

Input/output

Input: 1 balanced pair, 1 unbalanced pair

Output: 2 headphone jacks and 1 through φ6.3 RCA jack

Power/dimension/weight: 19W/40 (W)

Link to comment
Share on other sites

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

That's a bit disappointing. It doesn't seem like a big upgrade over the P-1 if it can be called an upgrade at all.

I guess Luxman America's going to sell it for $3000, more because of where the yen is in relation to the dollar today than because of improvements made to the design.

For reference, these are the P-1 mkI specs

Continuous Rated Output

4W+4W/8Ω and 2W+2W/16Ω,

1W+1W/32Ω and 500mW+500mW/64Ω,

53mW+53mW/600Ω

Input Sensitivity / Impedance

1.0V/23KΩ balance 1.0V/66K

Total Harmonic Distortion

0.008% or less (1kHz), 0.025% or less (20~20kHz)

Frequency Response

20~20Hz (+0, - 0.1dB), 10~100kHz (+0, - 0.5dB)

Signal-To-Noise Ratio (IHF-A)

Above 108dB

Inputs

One pair of RCA sockets,

One pair of Balanced sockets on XLR.

Outputs

3 outlets - quarter inch standard headphone jacks

Attachments

Volume, Balance controls, Balance Control Bypass Switch, Input selector switch,

Power switch, power source on (protection) indicator,

Balanced & UnBalanced Inputs, Line Phase Sensor, AC inlet

Electric Power Consumption

31W

Dimensions W x H x D

16.4"(467)

Link to comment
Share on other sites

  • 4 weeks later...

I got a email from on a higher note yesterday with the following information

"Luxman are replacing the P-1 reference headphone amplifier with the P-1u; another class A design, the P-1u features ODNF 3.0 and is more than four times quieter than its predecessor. We are expecting our first shipment of the P-1u in September @ $3,000; these are expected to sell out quickly as initial supplies will be limited."

Link to comment
Share on other sites

I got a email from on a higher note yesterday with the following information

"Luxman are replacing the P-1 reference headphone amplifier with the P-1u; another class A design, the P-1u features ODNF 3.0 and is more than four times quieter than its predecessor. We are expecting our first shipment of the P-1u in September @ $3,000; these are expected to sell out quickly as initial supplies will be limited."

Getting pretty expensive there. Wonder will the pricing on the original P1 will drop to 2k.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.