Jump to content

Spring Cleaning DIY Stuff Thread [Final Update]


luvdunhill

Recommended Posts

4-pin XLR to banana break out

IMG_1446.JPG

large, high voltage, grabber probes

IMG_1445.JPG

two, 3-pin XLR to banana (or spade) cables. These might need a bit of work, as I believe one of the connections was cutting out, so selling as is. Very nice cables though

IMG_1444.JPG

4-pin XLR to TRS

IMG_1443.JPG

surgeon silk thread, for turntable belts. Available by the foot.

IMG_1440.JPG

a pair of LED arrays used for prototyping (ended up going with a different config)

IMG_1439.JPG

prototyping board, sealed (for info look up part number)

IMG_1437.JPG

prototyping board, sealed (for info look up part number)

IMG_1436.JPG

Sony ECR-400: From Spritzer, but I lost the other $%$@ baffle, so available for parts / experimentation. These would really make the best SFI donor phone ever.

IMG_1424.JPG

PDIP receiver

IMG_1427.JPG

Koss ESP-950 extension cable

IMG_1428.JPG

LSK389 SOIC-8 to Toshiba 7-zip package adapters

IMG_1429.JPG

Apple-esque Flash drive

IMG_1435.JPG

Rub on, "audio" decals, 3 packs in black and 3 packs in white

IMG_1433.JPG

IMG_1431.JPG

Link to comment
Share on other sites

Last Update. This is it folks.

(5) Fairchild FQPF2N60C (TO-220F)

(2) ON TIP50G (TO-220)

(4) OPA2277PA (8-PDIP)

(5) OPA445AU (8-SOIC)

(3) OPA2227PA (8-PDIP)

(2) TLE2426IP (8-PDIP)

(2) IRFBC30 (TO-220)

(1) TL783C (TO-220)

(5) OPA227P (8-PDIP)

(3) OPA228PA (8-PDIP)

(2) TL081CP (8-PDIP)

(1) OPA2227P (8-PDIP)

(1) LT1206CN8 (8-PDIP)

(4) OPA2312P (8-PDIP)

(1) OPA2604PA (8-PDIP)

(1) OPA627BP (8-PDIP)

(2) OPA637BP (8-PDIP)

(2) OPA602AP (8-PDIP)

(6) OPA134PA (8-PDIP)

(5) OPA2107AU (8-SOIC)

(5) OPA134AU (8-SOIC)

(2) AD845KN (8-PDIP)

(2) AD8620 (8-SOIC)

(4) OPA2107AU (8-SOIC)

(175) BC550C (TO-92)

(75) BC560C (TO-92)

(17) IRF510 (TO-220)

( 8 ) 2SC2344 measured hfe (TO-220)

( 8 ) 2SA1011 measured hfe (TO-220)

(14) DSSK60-0045B (TO-247)

(22) 2SA968 (TO-220)

(60) 2SA1831 (TO-220)

(18 ) IRF9510 (TO-220)

(14) IXCP10M45S (TO-220)

Link to comment
Share on other sites

update, here's what is left at this point

(1) turntable pulley (pic)

(1) twisted pear audio Ballsie (pic)

(1) pair matched 6.8uF/50V Wima caps (pic)

(1) Serpac H-67 AC project case (pic)

(2) Jantzen 12.00mH 14AWG inductors (pic)

(2) power supply PCBs (pic)

(1) 24VAC AC wall wart (pic)

(3) TO-3 mica kits (pic)

(24) BER200 heat pads (pic)

(3) TO-247 insulators (pic)

(1) Weller soldering iron tip cleaner (pic)

(2) measurement weights (pic)

(1) Pass Pearl kit (pic)

(16) TDA1543A

(1) Bondhus 1.27mm hex wrench, for Rega (pic)

(8) CMC ceramic octal sockets (pic)

(-) decent gauge uninsulated solid silver wire (pic)

(2) Li-ion 3.7V, 700mAh batteries (pic)

(3) microphone preamp boards, with parts (pic)

(2) G8P-1A2T-F Omron 12VDC relay (pic)

(-) lot of spade connectors (pic)

(-) surgical silk thread for turntable belts (pic)

(2) 5x7 LED arrays (pic)

(-) LSK389 SOIC-8 to 2SK389 7-ZIP adapters

(5) Fairchild FQPF2N60C (TO-220F)

(4) OPA2277PA (8-PDIP)

(5) OPA445AU (8-SOIC)

(3) OPA2227PA (8-PDIP)

(5) OPA227P (8-PDIP)

(3) OPA228PA (8-PDIP)

(2) TL081CP (8-PDIP)

(1) OPA2227P (8-PDIP)

(1) LT1206CN8 (8-PDIP)

(4) OPA2312P (8-PDIP)

(1) OPA2604PA (8-PDIP)

(1) OPA627BP (8-PDIP)

(2) OPA637BP (8-PDIP)

(2) OPA602AP (8-PDIP)

(6) OPA134PA (8-PDIP)

(5) OPA2107AU (8-SOIC)

(5) OPA134AU (8-SOIC)

(2) AD845KN (8-PDIP)

(2) AD8620 (8-SOIC)

(4) OPA2107AU (8-SOIC)

(175) BC550C (TO-92)

(75) BC560C (TO-92)

(14) DSSK60-0045B (TO-247)

(22) 2SA968 (TO-220)

Link to comment
Share on other sites

Chris, do you want to try the tweeters? Some :asshat: tried to do a chargeback on me after he thought I shipped the items via a non-trackable shipping method. Fortunately, I didn't ship them.

Ooops, sorry didn't see this. I'll have to think about it. I have replaced a tweeter when I blew one playing around with a DEQ2496 :palm:, but they are a major pain in the ass to get to. I'll take a look at the dimensions, etc. and see if I want to mess with it or not. Bolt or screw pattern is different as well.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.