Jump to content

update transistor amplifier V3.0 to V4.0 from www.high-amp.de


high-amp

Recommended Posts

To all the owners of a transistor amplifier V3.0 from http://www.high-amp.de out there in the world. Here is a support how to update your amplifier to the version 4.0 that will be coming out soon. The items below are refered to the following schematic:

http://high-amp.de/html/transistor_v3_schematics.html

- replace the four resistors R07x and R08x with 51K/1W resistors to increase the current in the second stage to 4mA

- replace the two resistors R11x with 200 ohm resistors to increase the current in the last stage to 15mA

- replace the resistors R56, R57 by a constant voltage source as shown below (one per chanel)

- If you are using the 2SC5466 in the last stage replace it by the 2SC5353 (Q06x).

The 2SC5466 can not handle 15mA because of the nonlinear hfe-curve above 10mA (bad performance especially in high frequencies, missing resolution).

What do you have to expect from the update?

You will improve your amplifier significant to a very fine resolution over the complete frequency range with very deep and structured basses and an excellent reproduction of high frequencies. I would warmly recommend to you to perform this update. You won't regret.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.