Inu

The space between PCB and edge is 49m/m so your EPCOS are safe. I uploaded more pics.

I need to order another 450V 680uF. Won’t fit if height is 50m/m, need 45m/m. The edge of front panel touches the head of capacitors. Panasonic 450V 680uF (35mm x 45mm) is out of stock... Craig, How about your EPCOS caps?

I used http://www.custompowdercoating.com/ They did good job with reasonable price (less than $200 for all). Yes, I placed R81 and R82 on the back.

Powder Coating. Picasa Web Albums - inuponken - T2#

You don

Nice work! I hope your 2SC3381 have slim legs.

Would you write or engrave your autograph with production number on the bottom of the knob?

I have a lot of 5PF 1KV. (Mouser # 75-561r10tccv50) $0.15/pc + shipping.

I found a JRC 79M12A (500mA) in my old parts box. All sections on the power supply board are working. I am going to Dayton OH next week to get tubes and Teflon wires.

ST micro

...and STAX did not exist.

Neutrik female NC3Fah-2 (wrong) > NC3FD-H-B (or NC3FD-H-BAG)

Capacitance With 4171G = 4PF With Silicone sheet = 11PF

If you are not use a 4171G, need to increase the size of holes on the L-angle mounting brackets. It also prevents the mounting screw becomes GND. And, the 7721 does not fit the 2SA1486

I am planning to use AAVID THERMALLOY 7721-3PPSG with AAVID 4171G. http://img219.imageshack.us/img219/3379/t2tr.jpg Search result for: 4171G - Future Electronics Search result for: 7721-3PPSG - Future Electronics

Wow, nice gold Mabuchi motor on the board!

Craig, Thank you for the update. Neutrik Female XLR connectors: 568-NC3FAH-2 > 568-NC3FD-H (or H-B or H-BAG). I will keep my NC3FAH-2s for other project

Definitely... but soldering side up....

Bingo!

This is my 2nd post... Progress. Imageshack - t2main2.jpg - Uploaded by inuponken