HatIsMyFriend
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by HatIsMyFriend
-
-
Great to see them arrive well.
I read a lot of horrifying things about Fedex in the US, but strangely enough, they're pretty much the best of the bunch where I am. I consistently have them arrive full days in advanced, or have packages sitting at their warehouse waiting for delivery day, and I can get them to deliver much earlier if that's the case.
The local postal service, on the other hand, loses packages by delivering it to another address, stuck onto the bottom of another package. Of the same shape and size. -
Since the mini T2 boards seem to be correctly at 2mm, I don't think board flex will be a problem when changing tubes around. I'm fine with 1.6mm for the PSU.
-
-
I'm still in.
Thanks for organising all this, by the way! -
Bare boards please. Also, add the following to my order:
+1 GRLV78
+1 GRLV79
+2 GRHVxxx
Thanks! -
I don't mind either way.
If it's assembled though, would the voltage setting resistors be left blank for flexibility, or would it be set to +400 -460?
-
Hi, I've a few questions regarding the mini GRHV/LV, if this is the right thread to ask in.
1. Since the base board only has a single cap per unregulated voltage, I suppose the highest voltage secondaries for the HV section that can be used is 350VAC? Around 90% of a 550VDC cap's rating? Assuming that is the highest voltage rating I can get on a 680uF board, which it should.2. Is there a BOM for the base board? Have been comparing the diagram with the GRHV and LV and figured out most of it, but not quite sure if I got it right, especially the delay circuit. Found another diagram here on it, but it was on 12V rather than 5V, and I'm not sure if the relays would even open on 5V with the same values.
3. And, lastly, what's the trimmer R21 for? Bias adjustment, I assume? It's not on the GRHV boards, or I'm blind and/or looking at the wrong ones.
It's a lot to ask for so, thanks for reading! -
A full set, if not too late:
2 * GRHVxxx
1 * GRLV78xx
1 * GRLV79xx
1 * main board
1 * Mini T2 board
Thank you!
Kerry Design mini GRHV\GRLV and JoaMat mini T2 Group Buy
in Do It Yourself
Posted
Got the boards this morning, thanks a lot!