ang728
-
Posts
121 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by ang728
-
-
1 hour ago, cspirou said:
Finished soldering my Dynalo Mini but I have problems. First thing when I switched it on the CCS LEDs did not illuminate. Checked voltage at the TRS jack and it was about 8-9VDC. The Meanwells work fine and show +24V/-24V. The positive regulator is still showing +20.00V but the negative regulator is now showing +1.76V. This is very frustrating since it was measuring -20.02V before I started soldering the amp components.
Do I assume that the negative regulator is fried?
Looks like some soldering issues to me,especially with tps7a regs
-
congrats
yes cold joint will be affected by temperature and cracks very slowly,that's why it occurred few days after you've done your build
- 1
-
Very Nice
-
actually I tried 992/1815 from project spare parts .With some simple matching you can still get low offset results
sounding is also not bad tho
will keep trying other combos
-
18 minutes ago, mypasswordis said:
高鐵 isn't so bad I will be there Dec 5 - 15 but don't know when I will be available. I'll PM you soon.
too bad,the county I live (台東) has no THSR . May be you can have a quick meet with joehpj or others
- 1
- 1
-
42 minutes ago, luvdunhill said:
So, what do you guys think of my front panel layout? I would like to loose the indicator mark on the knob, but it functions in four positions alternating between the four options on/off for gain (high and low (MC/MM) and rumble filter (on/off). The LEDs are bi color green/red, green is on/MC and red is off/MM. The power LED is always green.
Just using the same value resistor for both colors, they seem to be matched somewhat. The LEDs are from Bivar and the circuit uses one common-anode and one common-cathode.
Just for Nate, I avoided bluegotta love that silkscreen , nice touch !
-
Congrates!
--
看起來也是住台灣的Diyer阿ww
--
- 1
-
team one box ? XD
- 5
-
20 hours ago, UFN said:
That's a very neat idea!
Would allow for a bit of experimentation to see how the JFETs change the sound of an existing amp I guess. Would you mind sharing artwork or schematics?
//UFN
sure,there it is
https://drive.google.com/open?id=0B9gzuIhmVOLcVmFnWUFXYUQxQ2s
It works fine on dynalo,but need to trim down PCB outline a little on current susy dynahi releases due to trimpots are close to THAT340 Socket .
and check transistor pinout before soldering
-
made these a while ago
Still loaded with BJTs,I think I should try JFETs as well
- 4
-
2 hours ago, spritzer said:
Welcome to the glorious world of high voltage.
no bang,no gain
-
recently blew up some 170D also,
later found maybe my thermal compound may introduce additional conducting path between screw and angle bracket
first killed my 10m90s and have damage on 170D,then when I fired up again after replaced 10m90s
you know what's going to happen :{
fixed by replacing 10m90s and 170D and check all the other transisitors won't have not too much thermal compound would causing short
-
my personal experience is no hum,but I twisted all the ac wire including umbilical cable
- 1
-
On 2017/5/8 at 11:05 AM, Kerry said:
Finished...
Back plates before I mounted them...
this casework is soooo sexy,superb !
- 1
-
woohoo nicely done !
-
4 hours ago, Flyingsparks said:
Very nice!
-
Woah seems you recieved the package,congrates!
but looks like some of your 10m90s aren't flat on angle bracket?
- 1
-
1 hour ago, sorenb said:
nice work!
- 1
-
1 hour ago, HemiSam said:
Any internal shots?
HS
Still crappy wiring jobs
- 12
-
1 hour ago, Pars said:
Yes, very nice work, and love the color! Are those based on Kerry's mini board?
it fits with full-size one not Kerry's mini board
-
1 hour ago, Rossliew said:
How would you describe the sound? Top and bottom units are identical except for the orientation of the power inlet?
Yes,both amps are the same except the orientation of the power inlet
-
Finished assembling this,pretty comfy color
- 12
-
12 hours ago, kevin gilmore said:
where did you get the delay board?
bought them form china
-
Soekris discrete R2R DAC?
in Do It Yourself
Posted
I used thruhole ver in previous build
and I'm sure I'm gonna use smt version next time........