ang728
-
Posts
121 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by ang728
-
-
Just Finished my Build
sounds very nice,more transparent than KSA-5 Klone IMO
- 1
-
Thanks for clarifying
some of my headphones is still sigle ended.
thinking it would be useful to have TRS out instead having two different build,just saving some flexibility
-
so this combo output wiring won't work on susy design?
I thought it will work on any amp if I tap R+ L+ G、R- L- G to two TRS contacts to drive two headphones (feeding balanced signal for sure)
-
Was guessing this method might work,just simply tap signals to trs contact but complexity for sure
from amb's beta22 page
-
Thanks I'll check them out.
I'm considering the have the dynahi balanced with 2 unbalanced input and one balanced input with an balanced and unbalanced input switch.
The output would be one balanced and one unbalanced. for unbalanced I will wire the left to + board 1, ground to - board 1, right wire to + board 2.
Will that work? or any better suggestion to have both balanced input and output configuration?
for outputs, you can consider using XLR combo jack ,then you can have one balanced out and two single ended outputs
-
could it plossible just simply using 4 boards instead cfa3 design to complete balanced build? seems possible
thinking 4 board would be more flexible for me
-
Try changing 75K resistor to 62K range,combined with 20K pot I can reach 125mV without problem
Oh well, I replaced the 20K trimpot with a 50K and the result is - nothing! Exactly the same values as before, meaning 1.45-1.5V across the 10R resistor and 2.15-2.2V offset on the output. Will have to keep looking I guess...
//UFN
-
Would anyone mind sparing some mpsw56's? Waited too long to stock up and they've disappeared from mouser now...
Still available on RS-online
-
in balanced mode the gain is Rf/Ri *2
you don't want to change the 5k input resistors, so
change the feedback resistors. Unlikely the compensation
cap needs to be changed
Thanks!!!
just to make sure,Rf in SS dynalo are R16,R19 right ?
-
What's the best way to adjust it down if it's relatively high?
also intrested about this,how to reduce gain if needed to?
maybe change R16、R19 I guess,but it seems will affect stability ? how to calculate
-
AH I got it ,didn't notice only one set of input stage
Thanks Dr.Gilmore
only one set of input devices.
this is unbalanced/balanced in, balanced out -
sorry but why this board cannot run L+R ?
I see ckt on both sides are identical from my untrained eyes.
thanks !
-
Just finished my KSA-5 Build, still need some work to refine
-
small question here .
Can I use 2n5565 to replace 2n5564 JFET?
The Multi Amp aka Dynalo Mk2
in Do It Yourself
Posted
A Taiwanese kit & film cap supplier called ucc
http://ucccap.myweb.hinet.net/
mine is older version