-
Posts
1,806 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Posts posted by jose
-
-
I'm waiting for a pair of "Pars bridge's" [emoji6]
-
Thanks Dr. Gilmore !!
-
Thanks guys.
I usually solder smd with a "normal" size but I never solder any with a long legs.
I tried with a 60w iron (a few second), solder paste and I guess that I have good result.
-
5 minutes ago, Blueman2 said:
... She really is a good cook.
Like the Dr. Gilmore
-
Novice question:
What is the correct way to tin this type of pad? Should I fill with tin or just put a little under the component as I normally do?
-
No Kit is offered. A GB was made two or three years ago in DIYAudio and the PCB´s after many delays arrived earlier this year.
PCB was designed to be used in this kind box.
-
While I wait components for my Dynalo SS and my CFP I finished my F5ha:
- 6
-
Now... you need a BH/GG
- 1
-
Guys, I´m working on my Dynalo SS and I finded this:
Pad of 24.9K is on the border of track.Yes, I know that is OK and work but there is enough space to move the track and center it with the pad so for future PCB´s I guess that is better change the gerber file ¿no?
I have rev 1.2 PCB´s
-
Pet Shop Boys "Fundamental"
- 1
-
Thanks Pars, I´m doing a regular Dynalo MKII. I guess that I have the last pcb´s (Rev 1.2, blue pcb with through hole resistors and SMD sand).
I supposed that I could use the LTL-307 (It´s the "standard" ) but in the BOM that I found there behind pointed to the ref. 351-5001. I don´t know why.
So if I can use the LTL-307ELC, better. I have a ton of these leds.
-
I have a doubt with the LEDs. In the BOM there is one of Vf 2v (Ref. 351-5001). it is right?
-
Romain Collin "Press Enter"
-
I follow the thread because it seems an interesting project.
On 27/05/2017 at 12:04 PM, kevin gilmore said:it could certainly be balanced susy.
biggest question is what to use for output transistors
Would there be big differences between the Dynahi-bal and Dynafet?
What characteristics should the new Mosfet have? -
According to the DIYAUDIOSTORE site, that price comes with 2 matched pairs.
Yes I bought it and price is for TWO matched pairs.
But.... on DIYAudio you can find reliable sellers that have Toshiba stock (GR and BL grades) at a better price. -
What is the problem with LS?
I bought a quad of LSk170/lsj74 on DIYAudio a couple of months ago but I still haven't compared them with Toshiba. -
You need a Carbon...
- 1
-
-
thanks you guys.I have two channels working with 2SK170/2SJ74 and now I'm listening to new amp, seriously. No noises, crunches, "low noise"... I'm starting to enjoy it again. I´m very happy.Lesson learned now that I'm going to start my Dynalo Susi
-
0 noise. I'm using 2sk170/2sj74 [emoji1]
With Toshiba Jfets is very stable, offset closed to 5~0 mVolt on both channelsOn R channel I'm using a THAT "good" (1 of 6) I hate this shit
- 2
-
Because sometime 2sk170/2sj74 are difficult to find.
http://www.diyaudio.com/forums/showthread.php?t=312426 -
Thanks spritzer. Last night I saw a F5 with some modifications and this uses this device.
-
Can be the LH0033CG a good option?
-
If you're in the EU you should be able to buy from Micross in the UK https://shop.micross.com/products.aspx?i=14 - shipping cost is still a bit steep but not as bad as from Trendsetter.
//UFN
Thanks!!! Add to my favourites. This is more reasonable. (17€ vs 120€ )
LSK489 (To-71) 7,6€/unit but they haven't LSJ689
Pass Labs HPA-1
in Headphone Amplification
Posted · Edited by jose
I have this Amp. We used Wayne desing but doble mono configuration. I did my amp last year.
I