boinger

I got it to work. Had to open in new tab for some reason.

delete

Anyone have the links to the bom and schematic for the group by? The first post seems to have the links unavailable.

Payment sent.

Any more impressions of this? How do these compare to stax sr-009

Drill and tap the transistors into a copper plate and once drilling and tapping is complete. Use a thermal epoxy to bond the copper plate to the water blocks then you can mount transistors onto the tapped copper plate.

Payment sent. Thank you

I did specify earlier in the thread I was responding to blueman's question on the line you quoted. 1 mini t2 set 4 grhv - assembled 2 GRLV78xx, 2 GRLV79xx 2 PSU main board

@Blueman2 Yes whatever boards can be populated please do

1 mini t2 set 4 grhv 2 each GRLV78xx, 2 GRLV79xx 2 PSU main board That should give me 2 full psu sets correct and 1 mini t2 amp set? 1 full psu should be good for the kgsshv carbon yes?

I have built a beta 22 and sigma 22 amps from amb. I have also repaired my blue Hawaii several times with live circuits for testing. I am just new to electrostatic amp construction from scratch. So I would love guidance. Having said that. I will take a full set for a mini t2 and psu. Plus a full psu.

How many of these boards are needed for a mini t2 build? I would like to get it for 1 mini t2 and potentially a psu for 1 kgsshv carbon Bare with me as im pretty new to the ES amp building.

delete

Is there a significant advantage to the GRLV or is it simpler to just use the low voltage section on the GRHV?

I see, What is the difference between the GRHV / GRLV? I see some people use the GRLV but do you need the GRHV in addition to the GRLV?

Hi thanks for all the replies, I don't have any boards as of yet. So basically I will need 2 kgsshv boards and the grv full board to get started? I did see a thread with the mouser project and a bom but there was several version of the bom so I am not sure which one to use for what board.

Hi new to the forum and I am interested in building a kgsshv or kgsshv carbon. I have done other projects from amb.org built a beta22 / lcdduino / volume control system. I am unaware if there are any guides or published places to get information on where to start these builds / parts lists? I have found the circuit board gerber files and I am guessing I have to send those to get my pcbs manufactured? But I am a bit confused as there are many versions and variations of build files. For example I see Kgsshvcarbon v1-6 and along eith them left / right / servo / ground. Any advice would be appreciated.