Quick Wiring Question

[bperboy]

Head-Case DIY'ers,

I've got a quick question on wiring for neatness. What is a recommended method for tying two 18awg cables from a transformer into one quick connect terminal? Should it be a short piece of 18awg cable soldered to both at one end, adding heat shrink over the junction?

Thanks,

bperboy

[luvdunhill]

Using a quick connect terminal that allows for 2x18AWG wire diameter input, Really, that's the best way.

[guzziguy]

Definitely. Tying two 18AWG into one will constrict the bass. Everybody knows that!

[cobra_kai]

You can also get piggyback or side by side quick connect terminals if you want. Like stuff here: http://www.mcmaster.com/#catalog/118/764/=hcgrcp. You then put a connector on each wire from the transformer. I would go with luvdunhill's way though.

[bperboy]

Okay thanks! I got some bigger quick connect terminals.. those did the trick!