October 5, 20241 yr Author comment_945069 Diamond drag engraving is surprisingly fun and easy. I decided to buy a spring loaded diamond drag engraver and do some experimentation on feeds, cutting depth, stepover etc. I ended up. 90 degree drag bit. tip flat estimated at 0.128mm, 0.1mm step over, fill crosshatch at 0 degree, 700mm/min feed speed. Far better results than using a V bit, much less sensitive to the material not being totally flat and far far faster. Report
October 5, 20241 yr comment_945071 Nice James. Now change the face from Times to Arial and it will look even better. Report
October 5, 20241 yr Author comment_945073 1 hour ago, audiostar said: Nice James. Now change the face from Times to Arial and it will look even better. Report
November 28, 20241 yr comment_950593 Another option for the desktop CNC machine that I purchased from Snapmaker works as well. The working space makes it easy to fit the whole chassis unit with the enclosed cover. It has two different laser modules that work perfectly for engraving. I have some pics shown while I was working on the GG upper and front panels. Milling the holes for tubes, Stax jack, and screws. I settled the speed to 100mm/min and 0.1mm step which gave me the balance of speed and a nice outcome. The bit is from Datron, 3mm Single Flute End Mill. I have another 2mm ball end bit from Snapmaker which I also used for milling the M2-size screw holes. The only complaint about it is the limited 200W CNC power which does not allow the drilling process. The 8nm laser module is the most satisfying. Easy to manage and nice outcome for the front and back panels engraving. Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.