Pirx

Thank you Spritzer, the schematic helps a lot Voltages in my T1 are very close to those from schematic. Schematic my T1 320 V 319 V 350 V 344 V 48 V 48 V I have no idea why this trafo is so hot, everything seems to be ok

Thank you for your interest, Kevin. After one hour of working I can read AC voltages: 251 V, 268 V and 6,25 V. I have no idea if it's right for T1. But I have SRM-006 schematic and there are very similar voltages: 250 V, 270 V, 6,3 V.

Yes, from Wiktor There are only 2 tubes. Trafo is set to 240 V. In my opinion discoloration and temperature doesn't look good. I have schematic from SRM-006 only, but I am not sure if it is the same or similar to T1 There is no hum or noise in headphones, amplifier seems to work good.

Hello Everyone This is my first post here. I have done some research about T1 troubles here and didn't find any topic about hot trafo. In my opinion this trafo is too hot but I don't have another SRM-T1 to check. I have removed tubes and then trafo is only warm - seems ok. Picture shows where I put temp sensor (blue wire). Did anyone had similar problems? P.S. I have just bought SR-Omega with Mk1 driver and SRM-T1 - amazing sound My previous system was SRM-727 and SR-507 and it wasn't so good.