ang728
Returning Member-
Posts
120 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by ang728
-
Looks like some soldering issues to me,especially with tps7a regs
-
congrats yes cold joint will be affected by temperature and cracks very slowly,that's why it occurred few days after you've done your build
-
Very Nice
-
actually I tried 992/1815 from project spare parts .With some simple matching you can still get low offset results sounding is also not bad tho will keep trying other combos
-
too bad,the county I live (台東) has no THSR . May be you can have a quick meet with joehpj or others
-
gotta love that silkscreen , nice touch !
-
Congrates! -- 看起來也是住台灣的Diyer阿ww --
-
team one box ? XD
-
sure,there it is https://drive.google.com/open?id=0B9gzuIhmVOLcVmFnWUFXYUQxQ2s It works fine on dynalo,but need to trim down PCB outline a little on current susy dynahi releases due to trimpots are close to THAT340 Socket . and check transistor pinout before soldering
-
made these a while ago Still loaded with BJTs,I think I should try JFETs as well
-
no bang,no gain
-
recently blew up some 170D also, later found maybe my thermal compound may introduce additional conducting path between screw and angle bracket first killed my 10m90s and have damage on 170D,then when I fired up again after replaced 10m90s you know what's going to happen :{ fixed by replacing 10m90s and 170D and check all the other transisitors won't have not too much thermal compound would causing short
-
my personal experience is no hum,but I twisted all the ac wire including umbilical cable
-
this casework is soooo sexy,superb !
-
woohoo nicely done !
-
Very nice!
-
Woah seems you recieved the package,congrates! but looks like some of your 10m90s aren't flat on angle bracket?
-
Still crappy wiring jobs
-
it fits with full-size one not Kerry's mini board
-
Yes,both amps are the same except the orientation of the power inlet
-
Finished assembling this,pretty comfy color
-
bought them form china https://goo.gl/LKTtXI
-
Epic Win
-
I'm not applying too much thermal grease on ceramic thermal pads and angle brackets but sufficient to have good thermal contacts My approach is applying thermal grease at about pea size then screw all the compoments together,let the pressure spread out the grease.