-
Posts
597 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Everything posted by Laowei
-
In Birgir's and Kevin's photos of populated KGST boards there is a socket, for but no OP27 installed. Is the OP27 needed?
-
Not really, only more heat to dissipate.
-
Getting ready to send out for some quotes on a custom transformer. I tried to capture all the needs for a KGST in a single unit, using the out of stock Antek transformer and posted info here as a basis. For those that have more experience ordering custom transformers, do any of the following specs look too constraining or impractical? KGST POWER TRANSFORMER SPECIFICATIONS: 120VA toroidal audio power transformer with: -Static shield between primary and secondary coils. -Heavier gauge wires than normal requirement to avoid the copper lost at full power. -Magnetic shield around the outside to reduce the magnetic leakage. -HiPot 3500V between primary and secondary coils. -Approximate overall dimensions: 100mm diameter x 50mm height. -Mechanically silent operation. -45C maximum temperature in ambient 20C environment. -Mounting hardware included. -All wires out minimum 300mm long. ELECTRICAL CHARACTERISTICS: Power: 120VA Inputs: 2X Voltage-Hertz 117V-50/60hz 117V-50/60hz Outputs: 5X Voltage@Current [email protected] [email protected] [email protected] [email protected] 6.3V @1.5A Thanks for any suggestions. I will send for quotes in a few days.
-
FYI...you can buy the SR-207 separately from Stax USA: https://www.staxusa.com/earspeaker/stax-sr-207.html
-
Sadly, I am that old too. So I have only built "normal tube amps". The KGST is my first amp for electrostatics. Going to learn a lot.......
-
Thanks Birgir, for the specs and your tip on no CT for the heaters. Never seen -400VDC in my previous tube amps built for driving speakers and headphones.
-
Looking for the specs for the power transformer needed for the KGST. Looks like the PS PCB inputs 2x 280-325VAC and 36VAC CT (each at what current load?). Plus will need 6.3VAC [email protected] for the 6S4A heaters on the amp boards. Any other requirements? Thx.
-
Hi Birgir..... I am too new to Head-Case and I can't pm you or reply to your ad in the Trader Section. I'm interested in building the KGST and saw a few nice pieces in your ad that I would like to purchase. Please pm me if this is possible. Thx
-
Thanks for all the hard work Kevin and Birgir. I am really looking forward to building this.
-
I am also a first time poster here and interested in the PCB group buy. Please pm me too if I can be included. Thx