May 7, 200818 yr No chuck. It's a disk of rock maple screwed to the lathe block and I mount my working wood with turners tape so I can cut right through it The drill holes in the blanks and mount are so I can center the blanks easily. Fair enough, I realized it was wood, but I guess what I really meant was did your lathe come with that mount? Mine only came with a chuck similar to this... I've been considering a jaw chuck like this... but what you have there would be a cheaper option, and would accomplish what I need.
May 7, 200818 yr Author Mine came with the mounting block that screws onto the spindle like the one in this pic.. http://tool-corral.com/shopsite_sc/store/html/media/W1752.jpg Woodcrafters sells them. It's a quick way to do cups.
May 7, 200818 yr Mine came with the mounting block that screws onto the spindle like the one in this pic.. http://tool-corral.com/shopsite_sc/store/html/media/W1752.jpg Woodcrafters sells them. It's a quick way to do cups. Cool, I'll have to look for one, thanks.
May 7, 200818 yr Author definitely a good looking pair of phones. how is the comfort with the split headband? Cheers Reks Comfort is surprisingly good, not stax strap good but very good all the same. The padding is soft and they have ample overall contact so it doesn't get sore. Much better than that shitty Stax SR-X headband. Also better than Senn 600/650, 701 and many others. I do need better earpads, the SR-5s are a bit shallow and sweaty. I looked at a pic of the originals and feel that my set looks way more seksy, but then, I am biased.. unlike these electrets. hehe. http://www.linaeum.com/images/sony_ecr500/ecr500_1_small.jpg Wood makes stuff pretty.
May 7, 200818 yr Author I made the cups a fairly compatible size of about 95mm so many pads will fit either over the lip or on the face. I've been thinking about the Beyerdynamic gel pads for room and super sealing, O2 pads would also fit but that's getting spendy again. I'd hate to spend more on stupid earpads than I did for the phones, nice as they are.
May 7, 200818 yr FYI the gel pads brought out a certain frequency in the lower highs that made it a terrible choice for the Darths. Not harsh, but just off. Not sure how it'll affect the ECR, though.
May 7, 200818 yr Author Hmmm, well bugger! I'd like some deep and angled pads for them. I stuffed some foam at the back of the SR-5 pads which helped but I like full ear clearance. It's surprisingly hard to locate good pads that don't cost a fortune. If anyone has suggestions, I'm all ears.
May 18, 200818 yr Hmmm, well bugger! I'd like some deep and angled pads for them. I stuffed some foam at the back of the SR-5 pads which helped but I like full ear clearance. It's surprisingly hard to locate good pads that don't cost a fortune. If anyone has suggestions, I'm all ears. Are those the newer plushy SR-5 pads, or the old vinyl ones? The new ones are pretty plushy and are enough for full ear clearence.
May 18, 200818 yr Author They are a vinyl set from a old supply I got a year ago from ebay. They're big enough to go around the ears, not very deep though.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now