lkong 19 Report post Posted July 29, 2019 Unfortunately for me, I have to supply [email protected] L-Adapter looked promising but only go up to 20V. I've ordered Smooth Like Butter Single Rail. PCB+parts+shipping will cost around $100. Hope this solves my problem. Quote Share this post Link to post Share on other sites
Pars 1,171 Report post Posted July 29, 2019 Does that mean you only require either u1/ic2, or they can both be fitted?You don’t like reading threads, do you?If you had read post #21, 3 posts before yours, I think the answer is pretty clear...Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
sbelyo 266 Report post Posted November 12, 2019 built a tap of sorts to see what my STX build draws just to make sure the transformer I have is adequately sized. The max it pulled was 2.1 amps at 19Vdc durring a CPU stress test. Salas says make sure you have 2x the capacity. Just now, sbelyo said: built a tap of sorts to see what my STX build draws just to make sure the transformer I have is adequately sized. The max it pulled was 2.1 amps at 19Vdc durring a CPU stress test. Salas says make sure you have 2x the capacity. Pars built the Dynalo Mini in the picture Just now, sbelyo said: Quote Share this post Link to post Share on other sites
sbelyo 266 Report post Posted December 28, 2019 ordered the parts and face plates today. Should be able to start the build next week Quote Share this post Link to post Share on other sites
