May 9, 20215 yr Using 282VA trafo (with [email protected] secondaries) divided by 230V line voltage * 133% gives me 1.63A for the fuse. As it is pretty much oversized, should opt for 1.5A or 2A fuse and should I combine it with a 1.6A (CL-130) or 1.7A (CL-120) termistor for inrush current protection, what is your take on this? Edited May 9, 20215 yr by starcat
May 9, 20215 yr I always use a thermistor for inrush current protection with my PSUs. If you use a thermistor I would try a 1A or even smaller fuse. You may have to experiment a bit based on the thermistor, filter caps of choice.
July 31, 20214 yr Moving forward with the CFAE, drilled the bottom and completely mounted the toroid and GRHV. The C2M1000170D's are still missing. Probably I should replace them with the C3M0350120D. New front and back panels next.
February 7, 20224 yr I don't know if I'm looking wrong but I can't find a schematic for cfaelectrostatic, besides, there are no gerberas for this project either. Are they available somewhere?
February 7, 20224 yr Author i found the synthesis file it is now posted in the documents directory cfaelectrostaticschem.pdf in the boards share there is cfaelectrostat.zip and electrostat2.zip there are other surface mount versions that have not been posted next time don't post twice, and you can always ask me
February 7, 20224 yr 1 hour ago, kevin gilmore said: i found the synthesis file it is now posted in the documents directory cfaelectrostaticschem.pdf in the boards share there is cfaelectrostat.zip and electrostat2.zip there are other surface mount versions that have not been posted next time don't post twice, and you can always ask me Ok, sorry for that. I don't distrube you
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now