Jump to content

johnwmclean

High Rollers
 View Profile  See their activity

  • Posts

    1,364

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by johnwmclean

  1. johnwmclean
    Hang on Dave... you should be downing the cheap stuff, and put the savings aside for the Carbon.
  2. johnwmclean
    http://www.farnell.com/datasheets/1998954.pdf Rated 600V (IEC) 300V (UL) I'm going to order some today, have a good inspection and see what I think before deciding to install.
  3. johnwmclean
    The Pheonix terminal blocks do not like heat, you have to be quick soldering not to compromise their integrity. I don’t have any issue with flux creeping through to the reverse side of the pcb when soldering, all the flux is contained within side I’m soldering, I love Kester.
  4. johnwmclean
    Insanity did that board also have flux leakage under the terminal block?
  5. johnwmclean
    RIP Rudy Van Gelder, ...will spin Blue Notes this weekend.
  6. johnwmclean
    I think Soren has closed this group buy as it’s already ordered and proceeding. Maybe Soren will chime it and let you know of any spares.
  7. johnwmclean
    2 x amp boards 1 left and 1 right psu board (left board has onboard low voltage supply, right board has the onboard bias supply) or use 1 + and 1 - grlv boards (golden reference low voltage boards) which then gives you flexibility to use 2 right psu boards for pro and normal bias
  8. johnwmclean
    A square has 4 sides. Steve has shown his new side.
  9. johnwmclean
    ...reachers for the guitar.
  10. johnwmclean
    Soren Paid. I reduced my order down to 2 (was 4) GRLV and 2 (was 4) Carbon boards. Let me know if there are any issues from me doing this, I don’t want to affect the group payment differences, if so I’ll pay for the original amount I promised. John
  11. johnwmclean
    ... and V6 silkscreen updated to 120ohm resistor (V5 was 182ohm).
  12. johnwmclean
    Only the left channel then?
  13. johnwmclean
    If your money's good your fine. Ships worldwide I'm sure.
  14. johnwmclean
    Cage's 4.33 reminds me of a pet rock I once owned.
  15. johnwmclean
    Very slick chassis and a great build.
  16. johnwmclean
  17. johnwmclean
    Happy Birthday!
  18. johnwmclean
    Happy Belated Birthday!
  19. johnwmclean
    Just throwing this out there. I like the split GRLV boards. They make layout design choses more versatile. You can put them together for virtually the same footprint as a full size dual board. The only consideration is that the transformer secondaries cannot be CT.
  20. johnwmclean
    A member here sold his Esoteric K0-1 for the Yggdrasil and hasn’t looked back.
  21. johnwmclean
    Just for you Erwin (wink).... my next Carbon front panel. Twos good too x 2
  22. johnwmclean
    Beautiful builds Geoff.
  23. johnwmclean
    Yeah those resistors are fine. Since you have a working board I’d through and compare voltages, starting from the rectifier diodes following the schematic. Just be very careful.
  24. johnwmclean
    I can’t see anything wrong. From the pics I cannot tell in the tantalum cap is correct polarity. What voltage are you going for? The resistors look different values in the voltage setting positions.
  25. johnwmclean
    Or a faulty LT1021.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept