derekbmn

Happy Birthday !!!

I have sat down numerous times and tried to put my thoughts down in writing in regards to these two phones, but soon fail as I tend to forget analyzing and end up just listening and enjoying the music. That in itself probably says something. (to me atleast) In the end they are both absolutley amazing headphones, with both also having the uncanny ability to disappear and leave nothing else. Great thread too !

It's generally said that "groove echo" will be exactly 1 revolution and/or 1.8 seconds ahead of the groove to be read, and anything else can be attributed to "print-through". In my experience, stylus profile does seem to have a bit of effect on how easily it is picked up, with the more exteme profiles (micro ridge, micro line, etc) actually being the worst offenders. Overall it's not something that bothers me much.

Yes all the time.....most of them are not mine.....

On vinyl

Happy Birthday !!! .....Are you baking yourself a special cake this year ? We demand pics of it if so...

Don't forget this Woo Audio 2 High End Headphone / Pre Amplifier. A bit different tube compliment. (although the same output tubes)

Anyone spend some time with Frank Cooters E-Stat amp ?

Anyone get a listen to the new Woo stat amp yet ?

No...nor would I. Spritzer said it best.

I like this part -"This is so that even if the worse happens and the oil leaks, and I get it on my hands, I can massaged it into my skin for a healthier looking skin." yeah that what he's doing...

I think you may quickly change your mind when it comes to different ICs and the O2s. They can literally make or break an O2 setup. The difference is pretty astounding between cables that works well with them, and ones that don't. (it's not subtle) A few things to look for in an O2 cable- A) Small awg pure silver wire.(think 30 to 32awg) The use of dielectrics that have a low dielectric constant.(cotton, kynar) no Teflon !!! C) RCA plugs that have small contact point(s) for the return line. On the cheap these are a no brainer. DIY Silver Interconnects

It needs to be clarified if you guys are using Rustoleum or Krylon. They both seem to be a bit different in how they react with the previous layers to get the hammered look right, and how much needs to be applied per coat. The Rustoleum stuff does seem to take forever to dry. (and I don't much care for it) I have had better luck with Krylon by far.

I've found the Hammer-Tone stuff is generally pretty forgiving, BUT I would avoid getting carried away with heavy coats. Take your time and let it flash off a bit before the next coats are applied. This is what has worked best for me. You'll be fine.

Hmmm interesting ...price isn't bad at all Woo Audio 22 Fully Balanced Headphone Tube Amplifier