May 19, 201313 yr comment_577574 Two of the igniters on our stove don't work (they haven't for 6 years) and we either need to replace the stove or get it fixed (before my mom or someone else burns down the house). [Right now, we just light the stove by hand but if you try to do a low simmer on the front burners sometimes they go out and don't relight on their own.] I think the one we have is a Dacor Classic 30" (natural gas). I have no clue how old it is. Does anyone know some brands that are known to be the most reliable (I don't like to fuck around with gas and electricity). We were looking at the Dacor Renaissance 30" but I am wondering if Dacor is so reliable. Some people seem to mention Wolf as well. I would also like something that does a nice low simmer. Of course, maybe we can just fix our old stove which would certainly be cheaper. Report
May 19, 201313 yr Author comment_577580 Probably under $2000. It would need tobe a cooktop 21" by 30" and would have to have the knobs on top. This what we have http://www.sears.com/dacor-classic-30inch-gas-cooktop-black-natural-gas/p-02208287000P Report
May 19, 201313 yr comment_577583 A quick check at Sears parts direct.... Replacement igniter assemblies for your current unit are $34 each plus shipping. A quck cross check at e-replacement parts.... Replacement burner head assemblies with igniters range from $32 to $48 each plus shipping depending on the serial number of the cooktop. Assuming you don't break something taking it apart it's a ten minute installation. Or call the local appliance service dude and see if they will give you a quote? Report
May 19, 201313 yr comment_577585 I like my Thermador. Not sure what model it is. I'm also a shitty cook. Report
May 19, 201313 yr comment_577588 A quick check at Sears parts direct.... Replacement igniter assemblies for your current unit are $34 each plus shipping. A quck cross check at e-replacement parts.... Replacement burner head assemblies with igniters range from $32 to $48 each plus shipping depending on the serial number of the cooktop. Assuming you don't break something taking it apart it's a ten minute installation. Or call the local appliance service dude and see if they will give you a quote? These DIY types sure do know how to take the fun out of buying stuff! Report
May 19, 201313 yr comment_577590 I'm sure Shelly could re-route monies saved into her cocktail/spirits fund. Report
May 19, 201313 yr comment_577593 I replaced ge premiere cooktop and oven with a standalone wolf. Gas top and electric oven. Automatic relight for burners and completely Sealed burners. I love the thing. Given that I am a massively sloppy Cook ths thing s super easy to clean. Pictures can be provided Report
May 19, 201313 yr comment_577595 as fun as new ranges are, i'd do this. Yep. If you're happy with how the current cooktop performs when 100%, I'd pay a local appliance person to repair it. Report
May 19, 201313 yr comment_577604 as fun as new ranges are, i'd do this. Yup, the investment is low enough that even if it fails you're not out much vs. replacement. Report
May 20, 201313 yr comment_577617 Well, looks like repair is the most economical way to go by far. Just in case you actually want a new cooktop, Consumer Reports says Wolf is quite reliable. However, they only listed about a half dozen total brands in their reliability ratings, and Dacor wasn't one of them. A cooktop seems to almost always be under $2k regardless of brand, though. Report
May 20, 201313 yr comment_577621 If you buy Wolf, you definitely need to have grahame over to break it in for you. Report
May 20, 201313 yr Author comment_577645 Yep. If you're happy with how the current cooktop performs when 100%, I'd pay a local appliance person to repair it. I am not 100% happy with the cooktop but don't know that I want to go through the hassle and money of a new one right now (espcially since I realize we can't get to the plug for the stove without cutting a hole in back part of the cabinet - I am not sure who came up with the plan of putting a slab of wood in front of the plug). We looked a bit into fixing it ourselves and it seems we might need some special tools. I'll look into it a little more. Report
May 20, 201313 yr comment_577732 I had to blind hole a 3/4 new gas pipe and pull a new 50 amp 220v feed for the oven Both were loads of fun. Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.