Omega_ELS

now we have it.

So where can I get this Shangri-La so I can listen to it? I won't be buying a complete set with an amplifier from Fang.

Does anyone have a 3D model of the Sigma case for printing?

its a new carbon? "kgsshv-carbon board with the 3rd generation sicfets as both current source and gain stages. +/-400 to +/-600 - probably limit to +/-550" (c)

Happy Birthday :3

Terrible website but it looks like new headphones right?

hi all I see you have a forum thread https://www.head-case.org/forums/forum/19-audio-gear-for-sale/ As far as I understand, it is intended for sales. Are there any restrictions on what member status I need to have to post there? Can I post there? Since this is a very closed place, I thought it would be a good idea to first find out the administration's opinion before doing anything here. thanks

a huge amount of work has been done...

So they just stole the design and didn't even ask permission before selling it for 20k euros?

Well, there are true portable amplifiers, for example, the Stax D10, but its runtime is 3.5 hours. Which is pretty funny. This HVRV can also be used with some kind of 12V power bank of a similar size. But then we have to carry two boxes. And why do we even need portable amplifiers.. Almost all Stax headphones are open-back. Unless we using a Stax 4070. But I think only a few people in the world have such a setup. Probably no one does. It's much more promising to simply have a portable, small amplifier that we can easily take on a trip, for example, put in a suitcase. The 10 kg kgsshv is hard to fit in a suitcase. And this one is just right.

Well, let's be honest, it was never portable. It consumes 600ma + more like 800+ for DC converters. No small battery can handle that—for example, 10 hours. Yes,we can use a power bank, but that won't be very portable.

Mine works without any problems. I tested it for 12 hours straight. Yes, it's quite hot. But all the heat is dissipated by the case. Power supply: +-400V. 5mA current consumption. 12V input. 1-2A power supply required. I'd say the sound is on par with KGSS, definitely not worse.

The main problem with the 009 is the driver size. They're simply smaller than the ES Lab or x9000. And the detail isn't as good as the x9000. If the 009D is the same as the 009, only for 2k+, then what's the point of buying it now? It's better to wait.

I would definitely buy one of these or similar ones, but no one sells them.

After reviewing the Spritzer and seeing the internals a few years ago, I was put off buying the JR. But now that I've listened to almost every full-size es earphone, JRs priced under 2,000 seem like such a not very bad buy to me. Don't they have a mesh stator, similar to the Omega 1 and X9000? seems they should sound good.. I would also be very interested to see the SR driver and what's inside...

already on sale for 350k

So, I've been testing it for two days. It's thermally stable for 12 hours. I think the tests can be completed. I just don't know what the upper power limit is. I tried +-400V and it works. And even at +-450V. I wonder if it can withstand +-500V or 600-700-800V? I saw someone build it with four 400V modules. So, +-800V.

Hi Kevin Well, it still works. It's just that the voltage distribution isn't ideal for -400V and +400V. I'm not sure if it's possible to supply different voltages. The sound is good and quite clear. But I think I'll still have to buy those proper modules and settle the power supply issue—there's no way to get +-400V 6mA for under $50.

So I connected this yellow DC-DC. It can produce -400 and +380 volts from 12 volts. Which is 20 volts less than I need. Interestingly, it can produce -400 volts in one side. And only +380 volts in the other. Funny. Now I'll be looking for ways to squeeze another 20 volts out of it. Or should I just skip the hassle and buy some decent USA S400 modules and be done with it.....

Well, if I turn the volume up to maximum, the amplifier can consume up to 10 mA at peaks, but I don’t listen that loud. I dont know if its minited to +-400v or maybe it can handle more.

Yes, you're right. That's why I had to connect it like this. I'll get this thing tomorrow 12v to +-390v DC DC I hope it doesn't beep or at least there's a way to eliminate the beeping with an RC filter or something. I'm just trying to try all the DC-DC modules before spending $50+ on those cool USA12400S-8 ones. But most likely, I'll just have to buy them.

It's been working reliably for an about hour now.I will continue testing 24\7. The power consumption of the modules themselves from the 12V power supply is 550 mA under load. The power consumption of the amplifier itself from these modules at +-400 V is only 5.5 mA.

i use 4 of this one https://www.lcsc.com/product-detail/C5279972.html DEXU Electronics B1212LS-1WR3 it's something like galvanic isolation

https://www.ebay.com/itm/275736642694 its max MAX1771 12v to 150-220v DC it can be ajusted i set 200v and just connected it 200+200 for +400 and 200+200 for -400 I read a similar problem about noise here but I couldn't find a solution. Well, unfortunately, I don't have a thermometer or pyrometer, but it feels like it's probably about 45 degrees Celsius or so - maybe more/less, It dissipates pretty well.