swt61 Posted February 25 Author Report Share Posted February 25 Al thinks it's funny how much I love that tool. It's just fun to use, aside from making better pocket holes than my Kregg jig. On 1/17/2024 at 12:08 PM, Grahame said: ^ is that 'shopped, or is there really graffiti in your hood, @VPI ? There's about as much chance that's real graffiti, as that opener being used on a bottle of Olympia beer. 1 Quote Link to comment Share on other sites More sharing options...
swt61 Posted February 25 Author Report Share Posted February 25 To say that I'm happy with the finished product is an understatement. What I really want to do is keep these for myself and tell Al's Sisters in law that they were just too messed up Certainly the nicest Milo & Otis product to date IMO. We're going to sneak these into their house and wait for them to discover tonight. 6 Quote Link to comment Share on other sites More sharing options...
swt61 Posted February 25 Author Report Share Posted February 25 Forgot to show the pull under the drawer. 4 Quote Link to comment Share on other sites More sharing options...
swt61 Posted February 25 Author Report Share Posted February 25 The finish matches their existing headboard/frame quite well. 6 Quote Link to comment Share on other sites More sharing options...
luvdunhill Posted March 5 Report Share Posted March 5 Went to an acquaintance who has like all the green tools and compared the ETS EC 150 to the regular one. Actually preferred the non EC and just picked it up in 3mm. Super annoying there isn’t a mesh/net disk assortment. Specifically having an issue with west system epoxy clogging up the regular paper backed disks and looking to try something new out. Quote Link to comment Share on other sites More sharing options...
Voltron Posted March 5 Report Share Posted March 5 What do you mean there isn't an assortment? Festool has mesh discs called Granat Net in a range of grits. You need a special pad to affix them, but that is typical. Sorry if I'm missing your point. Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 5 Author Report Share Posted March 5 It's the 3mm that confused me. That's a mighty small sander! OK, after a little investigation I see that it comes in different stroke sizes, and 3mm is one of them. But yeah, I use the mesh disc on Al's often. Quote Link to comment Share on other sites More sharing options...
luvdunhill Posted March 6 Report Share Posted March 6 (edited) 14 hours ago, Voltron said: What do you mean there isn't an assortment? Festool has mesh discs called Granat Net in a range of grits. You need a special pad to affix them, but that is typical. Sorry if I'm missing your point. There isn’t a multi grit option in smaller quantities - ya gotta pay $70 a box. Edited March 6 by luvdunhill Quote Link to comment Share on other sites More sharing options...
Voltron Posted March 6 Report Share Posted March 6 Ah. It's a long game, Marc. Or else just buy Diablo or some other mesh discs... 1 Quote Link to comment Share on other sites More sharing options...
dsavitsk Posted March 6 Report Share Posted March 6 Welcome to the wonderful world of festool. Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 8 Author Report Share Posted March 8 (edited) The 3M Cubitron mesh discs are very highly rated! Edited March 8 by swt61 Quote Link to comment Share on other sites More sharing options...
luvdunhill Posted March 8 Report Share Posted March 8 I went team Head-Fi and found the cheapest thing that I am here to tell you is amazing. It seems to be good enough for my little project. I wish the holes lined up on the pad saver so dust extraction would be better though. Making a trailer storage solution for a sailboat using marine ply and epoxy. 1 Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 8 Author Report Share Posted March 8 I remember buying some of the first mesh style sanding disc at Woodcraft in Austin years back. It's so easy to keep unclogged, so it last a long time. The hard part is keeping the outer edges from fraying. Hopefully we'll see pics of your completed project Marc. Quote Link to comment Share on other sites More sharing options...
Voltron Posted March 9 Report Share Posted March 9 Did you buy the festool adapter pad? I would think the holes would line up perfectly. Put the pad on without the mesh so you can see the holes lined up. Then put on the mesh disc.. Quote Link to comment Share on other sites More sharing options...
luvdunhill Posted March 9 Report Share Posted March 9 51 minutes ago, Voltron said: Did you buy the festool adapter pad? I would think the holes would line up perfectly. Put the pad on without the mesh so you can see the holes lined up. Then put on the mesh disc.. Uh no. I see now. Sadly none at Woodcraft. Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 9 Author Report Share Posted March 9 So it seems that the upcoming new regulations on all table saws (these will require safety systems like SawStop has on all future table saws), will be a little less problematic for other manufacturers. As SawStop, or Festool (the current owner of SawStop) will be voluntarily sharing their patent once the new regulations are imposed. I believe the patent ends in 2026 anyway, but many patent holders do everything possible to hold onto or extend their patents, so it's refreshing to see a manufacturer take this approach. 1 Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 9 Author Report Share Posted March 9 (edited) I do have a bit of concern on this technology, as it's my belief that people can become complacent and get careless because of a false sense of security. I have been using table saws from the age of 12 (51 years). Every time I'm operating a table saw I block out everything else and put my full attention into the use of said saw. I can't count the times I've ripped fellow employees a new asshole for carelessly knocking into me while I'm using this tool. Sometimes it seems that no matter where I set up the saw, some idiot will start hauling lumber, or moving tools, ladders etc. right in the path where I'm using my saw. Then they get a sore vagina when I jump their ass. And even as careful as I have been through the years, I still managed to resize a finger. It's a very dangerous tool! And a collapsing blade system won't do a damn thing to keep someone from being gutted by kickback. I've been an audience to this more than once. Riving knives have dropped these incidents drastically, but carelessly binding a board between the fence and blade can still create a devastating situation. My point is the table saw still commands the utmost respect and complete attention, whether you have an electrically conductive blade system or not! Edited March 9 by swt61 2 Quote Link to comment Share on other sites More sharing options...
VPI Posted March 9 Report Share Posted March 9 Worked all morning on a new pocket knife project to throw up on Instagram, only to find out the sensors think I did not have enough 12 year old girls in their underwear dancing on my video so it is not appropriate for sharing. 1c67f6f77a8d4e2793ff3f504a630748.mp4 1 Quote Link to comment Share on other sites More sharing options...
dsavitsk Posted March 10 Report Share Posted March 10 17 hours ago, swt61 said: I do have a bit of concern on this technology, as it's my belief that people can become complacent and get careless because of a false sense of security. I have been using table saws from the age of 12 (51 years). Every time I'm operating a table saw I block out everything else and put my full attention into the use of said saw And yet, if you'd had that technology, you'd have 5% more finger than you currently do. 1 Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 10 Author Report Share Posted March 10 Absolutely! Not denying that at all. Just saying that you still need to be very aware using any table saw. 1 Quote Link to comment Share on other sites More sharing options...
luvdunhill Posted March 10 Report Share Posted March 10 19 hours ago, swt61 said: I do have a bit of concern on this technology, as it's my belief that people can become complacent and get careless because of a false sense of security. I dunno, one time I saw you put the wood in the wrong direction. Just saying. Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 10 Author Report Share Posted March 10 Dear Sir, I have always put my wood in the correct direction, and have several young men that can verify my statement. Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 15 Author Report Share Posted March 15 I found a 'new to me' woodworking channel on YouTube. It's a Norwegian guy that builds most of his projects out of Pine. Now projects from Pine don't really peak my interest, but it's difficult and very expensive to get other woods in Norway. Even Maple and Walnut are exorbitantly priced there. He doesn't do a lot of voicing in his videos, which also doesn't really appeal to me. Most of his projects are pretty basic, though he does seem to have some skills. Actually I can't seem to pinpoint what it is I like about watching his channel? Meet Are Baloni. 1 Quote Link to comment Share on other sites More sharing options...
swt61 Posted March 15 Author Report Share Posted March 15 Quote Link to comment Share on other sites More sharing options...
Voltron Posted March 15 Report Share Posted March 15 Norwegian twink alert! 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.