February 27, 200818 yr comment_100431 Untill now I read only severe negative posts for SRM-727II. But I still can't find anywhere concrete opinion what's the problem with this Stax amp. I see most people own SRM-007tII, SRM-006t and even SRM-717 but not the 727 How many of you had the opportunity to compare 727II with another amps? Report
February 27, 200818 yr comment_100446 If anyone needs help to burn in their SRM-727II, I think I can help Report
February 27, 200818 yr comment_100447 If anyone needs help to burn in their SRM-727II, I think I can help FOTM FOTM FOTM FOTM FOTM FOTM FOTM... Report
February 27, 200818 yr comment_100454 The 727 is supposed to be a similar design to the 717 with the output stage dissipating about 3 times the power, therefore a more extended high frequency and low frequency response. If it really sounds much worse, there certainly could be a number of reasons, but i would be surprised if on a casual basis anyone could tell the difference between the two. Unless stax made some kind of horrible mistake. Report
February 27, 200818 yr comment_100485 I didn't compare them directly but I did compare them against a known reference and I preferred the 717. I found the 727 to be too warm and slow for my liking. Report
February 28, 200818 yr Author comment_100728 How many of you had the opportunity to compare 727II with another amps? No one. I don't mean a brief listening of 727II but a more detailed comparison. I've noticed that one term listening can't give me the complete picture of one component. It depends on many conditions - technical, psychological, etc. Often the first impression is quite different from my final conclusion... Report
February 29, 200818 yr comment_101268 800-1000$ is the norm but you can find higher and lower as usual. Report
February 29, 200818 yr comment_101314 Hm, I'm eyeing that Omega II with 717 interest check on headfi. Has the right voltage, too, 230V. Do you think something like $2200 is a realistic offer? Report
February 29, 200818 yr comment_101317 Hm, I'm eyeing that Omega II with 717 interest check on headfi. Has the right voltage, too, 230V. Do you think something like $2200 is a realistic offer? I think thats a very realistic offer, though I've seen the for sale prices on used OII/amp combos vary wildly, from $2000 to $3000. Report
February 29, 200818 yr comment_101318 If the set is in great condition then that is a very fair price. Report
February 29, 200818 yr comment_101323 Cool, thanks guys. Excellent condition as far as I know with flight case and everything. Report
February 29, 200818 yr comment_101345 800-1000$ is the norm but you can find higher and lower as usual. damn, i shoulda snapped up the 717 that an aussie was selling for AUD$700. too bad i was broke =( Report
March 1, 200818 yr comment_101379 Pah, you think that's bad. I bookmarked this to keep an eye on it with a view to buying if it didn't go too high, then this happened with over a day to go.... http://cgi.ebay.com/STAX-SRM-1-Mk-2-Headphone-Amplifier_W0QQitemZ200203586023QQcmdZViewItem?hash=item200203586023 Report
March 1, 200818 yr comment_101387 Just bought the SR-007/717 package for $2300 shipped. Saw some pictures, perfect condition, really nice. Gotta love the weak dollar. Report
March 1, 200818 yr comment_101390 Congrats on the new gears! Gotta love the weak dollar. Hey, someone's gotta take advantage of it. Report
April 14, 200818 yr Author comment_113171 Something strange about the 727II : Today I measured bias voltage 318V In the specifications of 727II the bias voltage is shown as 580V so can anyone explain me why is it less? Report
April 14, 200818 yr comment_113178 You can't measure the bias at the front panel connector without a real VTVM. Digital meters are way to low in impedance... Report
April 14, 200818 yr Author comment_113196 Dear Kevin, we used a Yokogawa 7532 03 DMM, which measured ~380Vdc before the ballast resisitor (4.7Meg), falling to 312Vdc on the pin. OK, maybe the DMM drew some current when measuring bias voltage on the pin, but the voltage before the resistor comes from a low-impedance source, so the problem remains. Report
April 25, 200818 yr comment_116231 Something is definitely wrong with the bias circuit if you measure only 380 volts before the ballast resistor. Likely one of the 2 diodes. Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.