November 3, 200817 yr Author The Texas contingent would be very interested in listening to it Yes please. I'd love to A/B it with my Consonance SUT. Just tell me when you want it back and I can send it, I'm pretty sure now that I'll buy one when I get the chance. By all means, send it on to the Lone Star state whenever you are done. I'm doing just fine with my current setup.
November 7, 200817 yr I ordered my Cinemag transformers yesterday, according to David at Cinemag they have a very hard time keeping the transformers in stock. So my units should be shipped next week. I guess since they are out of stock, they must be either a really good product or they are being purchased based on price alone. I'll keep you posted on the build up, in the mean time I will need to find a Denon Dl 103 to purchase.
November 7, 200817 yr Author purchase your DL-103 from ebayer williamthakker. Even shipped from EU his price is by far the best, and his reputation is impeccable.
November 20, 200817 yr Well I have the Cinemags and the Zu/Denon Dl 103 up and running and I could not be more pleased. The Cinemag transformers were a breeze to set up with no hum at all, and the Zu/Denon is unbelievable. Zu was running a special on the 1% model at $299.00, which makes the duo even more impressive. With a little work and approximately $425.00 in parts I have a really wonderful MC setup. IMHO, you would have to spend a lot more to get anything better. This pair is highly recommended.
November 20, 200817 yr Cinemag doesn't really stock anything, from what I can tell. They build everything to order. That said, I'm a big fan of the transformers in my m3, so I'm sure they're at the very least a good value. I was looking into a dl110, but maybe I'll do 103 + SUT instead.
November 20, 200817 yr Author Well I have the Cinemags and the Zu/Denon Dl 103 up and running and I could not be more pleased. The Cinemag transformers were a breeze to set up with no hum at all, and the Zu/Denon is unbelievable. Zu was running a special on the 1% model at $299.00, which makes the duo even more impressive. With a little work and approximately $425.00 in parts I have a really wonderful MC setup. IMHO, you would have to spend a lot more to get anything better. This pair is highly recommended. nice deal on the zu, I hope to one day try one.
November 20, 200817 yr Well I have the Cinemags and the Zu/Denon Dl 103 up and running and I could not be more pleased. The Cinemag transformers were a breeze to set up with no hum at all, and the Zu/Denon is unbelievable. Zu was running a special on the 1% model at $299.00, which makes the duo even more impressive. With a little work and approximately $425.00 in parts I have a really wonderful MC setup. IMHO, you would have to spend a lot more to get anything better. This pair is highly recommended. That's the same cartridge and deal I got too. The Cinemags are supposed to be a wonderful match. Can I ask what tonearm you're using?
November 20, 200817 yr I ordered my Cinemag transformers yesterday, according to David at Cinemag they have a very hard time keeping the transformers in stock. So my units should be shipped next week. I guess since they are out of stock, they must be either a really good product or they are being purchased based on price alone. I'll keep you posted on the build up, in the mean time I will need to find a Denon Dl 103 to purchase. What other MC carts in that price range have you heard? Just wondering, because statements like this "IMHO, you would have to spend a lot more to get anything better. " are pretty bold.
November 20, 200817 yr Just wondering, because statements like this "IMHO, you would have to spend a lot more to get anything better. " are pretty bold. I dunno, say another $300? Maybe that's a lot percentage wise... I still maintain my hubristic (dunno if that's a word, but hey..) comment that graces the title of the "ZYX" thread I started here.
November 21, 200817 yr Tonearm: SME 3009 Series II I guess opinions may vary on the DL103/Cinemag combo, as they do on everything audio. But with that being said, I own several MM ranging from an ancient Stanton 681EEE/S to a Grado Reference Sonata, and this combo out performs them all. I have listened to several higher end units such as Dynavector X20, Ortofon Rondo and Shelter cartridges, and without doing an A/B comparison can't give detailed reviews, but I don't remember them offering anything that suggested any better tracking, soundstage or overall presentation than this combo. Let's not forget my statement was also made based on finding a true multi-tap SUT for $125.00, most DIY Transformers will cost at least twice that and pre-built units can cost much more. A parting thought, there may be something special about matching a 45 year old cartridge design with a 40 year old tonearm design, it's just groovy man.
June 8, 200917 yr Any Bugle owners care to comment how many hours they get out of a pair of 9v batteries? Debating whether I want battery power or one with the PSU. The huge plus side of the battery powered unit being it would be infinitely easier to "case" up.
June 8, 200917 yr Any Bugle owners care to comment how many hours they get out of a pair of 9v batteries? Debating whether I want battery power or one with the PSU. The huge plus side of the battery powered unit being it would be infinitely easier to "case" up. Deepak, the figure "20hrs" sticks in my head for some reason. Of course it'll largely be dictated on opamp choice and battery capacity. Actually I just looked and Hagerman quotes it at 16hrs.
September 22, 200916 yr Well I have the Cinemags and the Zu/Denon Dl 103 up and running and I could not be more pleased. The Cinemag transformers were a breeze to set up with no hum at all, and the Zu/Denon is unbelievable. Zu was running a special on the 1% model at $299.00, which makes the duo even more impressive. With a little work and approximately $425.00 in parts I have a really wonderful MC setup. IMHO, you would have to spend a lot more to get anything better. This pair is highly recommended. Hello, A total newbie here, looking to buy a phono-stage match a MC Denon DL103R. If I pickup the recommended "Bugle" (assembled) and Cinemag tranformers plus additional power supply where do I go from there? i.e what soldering, etc if any required? Again, sorry for the newbie question. Gary
September 22, 200916 yr Hello, A total newbie here, looking to buy a phono-stage match a MC Denon DL103R. If I pickup the recommended "Bugle" (assembled) and Cinemag tranformers plus additional power supply where do I go from there? i.e what soldering, etc if any required? Again, sorry for the newbie question. Gary Gary: I'd try and find one of the "assembled" Cinemag setups, on Ebay/Audiogon/etc. At that point, all you need is cables.
November 25, 200916 yr Hi, I have a Bugle set with 50db gain, and would like to use it with a Denon DL160 cartridge. Anyone could suggest a proper loading value...
November 25, 200916 yr Author I enjoyed it at 100ohms, but currently run it at 10ohms, both sound great. different phono stages though, the 100ohms was the bugle, the 10ohms Quad 99 Pre. 470ohms (bugle) was to bright for me. YMMV.
November 25, 200916 yr I enjoyed it at 100ohms, but currently run it at 10ohms, both sound great. different phono stages though, the 100ohms was the bugle, the 10ohms Quad 99 Pre. 470ohms (bugle) was to bright for me. YMMV. So you mean ADDING a 100ohm resistor to the Bugle, right?
November 25, 200916 yr Author So you mean ADDING a 100ohm resistor to the Bugle, right? whatever resistor you need to add in to have the loading at 100ohms. there is a calculator at the Hagtech website that figures it out for you. I'm not real strong with DIY stuff so I can't tell you what it is off the top of my head.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now