GrindingThud
-
Posts
430 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by GrindingThud
-
Update after listening all day with it closed up - temps in the base of the heatsinks are at least 77°C, current is 14.2 mA. Yep, it’s hot. The batteries crapped out in my IR thermometer, so I used a high end contact meat thermometer between the fins, lol 🥩. The heat sinks are not in contact with the case…I may try the aluminum bar mod if it gets too hot.
-
It’s alive! Getting the offsets adjusted is so touchy…finally got it below 2mv as it drifted about. Did it without heatsinks after being on for a while. It seems to settle in around 14ma with the LTST-C170CKT LEDs and the 402R. Running 240R vice the 255R. Will likely let this cook for a while and see if it needs any tweaks. That front panel light is a bit bright…may need to tone that down a bit… 🤓
-
Happy Birthday!
-
I’ve got the group buy case…planning on adding the 5mm aluminum bar to it. Thanks Pars! I’ll need to think some more about the regulators while I wait for some MMBTA06 to come in I didn’t realize I never received… What LED and bias resistors did you end up with in the end? I’ll put mine in the sheet once it’s up and running. Likely will use 402 / 240 with the LTST-C170CKT.
-
Before I start working topside, I have a question about the onboard regulator vs the AMB. I have both, and given the ability to get it attached, which is preferred? Is it better to just use the AMB and get the heat off the board?
-
The golden orb thing that created an electrostatic field to “tune” the room was the pinnacle of oiliness I thought…I still feel dirty after being in the room with it. I think it was on the 6th floor too 😂
-
A few worthy photos from CAF this weekend…
-
This is just plain beautiful! All pales in comparison 💕
-
I will be there Saturday!
-
Thanks!
-
What is the favored method for affixing the heatsinks to the output transistors? After years on the shelf, I’m finally getting around to assembling this. 🤓
-
Weird in a good way…I enjoyed this one.
-
-
-
-
-
The IntelCrab on twitter has pretty good information...
-
It’s that time of year for the Meat Manger to come out…
-
Thank you!
-
Is that a WA3 down there I see? Love this setup.
-
and now for something completely different part 3
GrindingThud replied to kevin gilmore's topic in Do It Yourself
Nice! Makes me want to put mine in a case now. -
Another vote for that phone!
-
Hey, you changed your TF2 photo...cool.
-
-
Crazy good set this one is!
