May 15, 20188 yr Guys, Dr. Gilmore has done a review of the Buffer's design. Includes several improvements like two servos (one for the input and one for the output) resistance for the input impedance, trimpot for bias ... diffinput5b - CADCAM.ZIP diffinput5b.PDF All in the same size as the previous board. These improvements help solve the two problems that I have encountered: A) Oscillation by impedance in the input B.) Offset due to Fets Thanks Dr. Gilmore Edited May 15, 20188 yr by jose
May 15, 20188 yr Can't access the attachments... The page you are trying to access is not available for your account. Error code: 2C171/1
May 15, 20188 yr 1 hour ago, kevin gilmore said: Original downloads work for me? yes but you =SuperStar first links no=go second work, Thanks
June 15, 20188 yr Thanks Dr. Gilmore. It really is not that expensive either (an extra Opa and some more resistances). If it is as versatile as we want, what does it matter if something more expensive comes out? In addition, the unbal/bal works perfectly so it would be normal to have the buffer at the same level.
September 13, 20187 yr digging up this thread ... has anyone build smd version of ubal and buffer? I built mine ,when firing it up , leds did lit up and smoked instantly picture as attached .not quiet sure whats going on yet. I use diffinput3smtd and dbuf3 gerber files to make curcuit boards
September 13, 20187 yr I only know one person so far that did the SMD version. He says it gets pretty toasty and needs heatsinks. He also did a few mods. On my Dynalo Mini I mounted the LEDs backwards initially and it drove the temp really high. Read his posts because he also changed a few things that you should probably implement. I plan on building it too but have some other projects in my queue I need to finish. first thing i would ask is does it work without the buffers? Edited September 13, 20187 yr by cspirou
September 13, 20187 yr yes I read this before so I thought this board should work, was thinking maybe I need to use other smd resistors which has higher wattage rating?
September 18, 20187 yr Author Is there any problems with using BC546C form On Semi and BC556C from Diotec? I can't find BC556C from ON Semi
September 18, 20187 yr If you don´t find C grade, I used BTA and I hadn't problems with un/bal boards (I used sand with 500Hfe). Edit: I mean CFA and C Edited September 18, 20187 yr by jose
September 18, 20187 yr Author I have enough B grade but thought it might not be high enough. So it looks like I'll be ok if I have to use that
September 18, 20187 yr 1 minute ago, sbelyo said: I have enough B grade but thought it might not be high enough. So it looks like I'll be ok if I have to use that No, sorry I mean CFA and C grade
September 18, 20187 yr Author ok, it looks like I can get 546C from On Semi and 556C from Diotec. Did you use same brand?
September 18, 20187 yr No, I was lucky I was able to find BC546CFA (Mouser) and BC556C (musical equipment and electronic store of my city) from "On Semi" but remember that I could only matched NPN with NPN and PNP with PNP. If you are not sure, you can buy some and measure them. Maybe you're lucky.
September 19, 20187 yr The BC856C variants are the SMD equivalent of the BC556C... you'd have to get or make adapters to use them though. They don't handle as much power also (320mW vs. 500 for the BC556C).
September 19, 20187 yr But the problem of using adapters here is the space they occupy. This afternoon I will post a picture of how my preamp one is going.
September 19, 20187 yr Nice @jose! What are the Mundorf capacitors for? I thought this was DC-coupled?
September 19, 20187 yr Thanks guys. My idea is to have three normal inputs (1 XLR +2 SE) plus a MM preamp (in my case a VSPS) AND three different types of outputs (and a mute): 1º Un/bal + pot. (It´s like a "direct" output) 2º Un/bal + pot + KG Diamond buffer MKII 3º Un/bal + pot + KG Diamond buffer MKII + dc Caps. So you can have three "different" types of sound. The appearance is not as good as I would like ? but it works (which is the important thing) although I still have some things to finish. Edit: Did I say that I like blue LEDs? ?☺️? Edited September 19, 20187 yr by jose
September 20, 20187 yr Author That's looking good Jose! I was able to find Diotec BC546CTA https://www.tme.eu/en/details/bc546c-dio/npn-tht-transistors/diotec-semiconductor/bc546c/ And Diotec BC556CTA https://www.tme.eu/en/details/bc556c-dio/pnp-tht-transistors/diotec-semiconductor/bc556c/ They have them in stock for a decent price and sell to individuals like us. I ordered yesterday and got a DHL tracking number early this morning. It says I'll have them tomorrow. They charged like $9.00 for overnight from Poland to the US!
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now