January 27, 200917 yr comment_200405 I used some sandpaper to get the solder to stick and I don't know if you can buy the nuts separately. I got some Cardas GRFA RCAs for my DAC and amp and they work just fine. My friend had no problems with soldering them and I have used them for more than a year now with no problems. Nothing scratched off and they look like new. Report
January 27, 200917 yr comment_200428 I hate those RCAs like the plague, I'll never use them again for any project. Rhodium plating is the devil. Report
January 27, 200917 yr comment_200429 I hate those RCAs like the plague, I'll never use them again for any project. Rhodium plating is the devil. What was the problem with them? Report
January 27, 200917 yr comment_200431 What was the problem with them? they require the liberal use of flux Report
January 27, 200917 yr comment_200432 they require the liberal use of flux And Lucifer's own soldering iron. Report
January 27, 200917 yr comment_200436 I'll bow to whatever Pars finds when he works them. Just use a big enough tip, 50W, and lead solder, and you'll have a good looking joint after heating it up for 10 seconds or so. Report
January 27, 200917 yr comment_200442 Has anybody tried the PCB variation of these sockets? Might be easier to work with... Report
January 27, 200917 yr comment_200443 Perhaps I'll wish for the iron I used to use occasionally at Mostek.. not sure how many watts it was, but the tip was probably 1" and it generally required both hands to use it. Worked great on multiple 00 ground braids though. Report
January 28, 200917 yr comment_200716 Has anybody tried the PCB variation of these sockets? Might be easier to work with... I have, ordered them middle of last year, soldered the first one into my PCB yesterday, no problems at all. Let me know if you want the dimensions for making a footprint in your PCB software as Cardas have two drawings, one MS Publisher type that is on the website and is incomplete/wrong, and one CAD type which they only have on request. With big connectors like this I set my <a href="http://www.rapidonline.com/Tools-Fasteners-Production-Equipment/Soldering-Equipment/Soldering-Stations/High-power-soldering-station/72316">soldering iron</a> to max and use a lead solder that isn't short of flux (i.e. not no-clean or variants), then it takes a few seconds only. From my WIP B22 : Please excuse the cotton wool all over it (the flux in this solder splatters everywhere) Report
January 28, 200917 yr comment_200721 I have, ordered them middle of last year, soldered the first one into my PCB yesterday, no problems at all. Let me know if you want the dimensions for making a footprint in your PCB software as Cardas have two drawings, one MS Publisher type that is on the website and is incomplete/wrong, and one CAD type which they only have on request. With big connectors like this I set my <a href="http://www.rapidonline.com/Tools-Fasteners-Production-Equipment/Soldering-Equipment/Soldering-Stations/High-power-soldering-station/72316">soldering iron</a> to max and use a lead solder that isn't short of flux (i.e. not no-clean or variants), then it takes a few seconds only. From my WIP B22 : Please excuse the cotton wool all over it (the flux in this solder splatters everywhere) http://mathew.smugmug.com/photos/463267861_Rj6F6-M.jpg[mg] http://mathew.smugmug.com/photos/463268193_NrT2J-M.jpg[mg] Can't wait to see that B22, that board looks really great! Report
January 28, 200917 yr comment_200743 I used some sandpaper to get the solder to stick and I don't know if you can buy the nuts separately. Sandpaper is Ok, but it may be easier to use a fibreglass pencil. Also useful for lots of other jobs.. Welcome to rswww.com Part number 514-868 Probably available from digikey/mouser/etc. as well. Report
January 28, 200917 yr comment_200869 That could definitely work but I'd still use WBT sockets. Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.