February 12, 201511 yr comment_672136 BTW, are the new amp boards going to have provision for substitutes for the (apparently) out of print 2SA1468s? Report
February 12, 201511 yr comment_672137 You mean the STN9360? Pretty sure that's always been an option on the kgst boards. Report
February 15, 201511 yr comment_672594 If it's about 100$, I'm firmly replying for one set. Thanks for the offer ! Report
February 17, 201511 yr Author comment_673023 Hi Folks, I've been out with one of the nasty flues the last week. Will be getting a quote and pulling this together this week. Report
February 22, 201511 yr Author comment_673912 OK here's the tally so far, check if I have everybody interested DefQon s_r Cucera Tachikoma mwl168 Gokury JimL (2) particleman14 G600 sorenb 14 boards total with three for me With maybe's (I'm not counting in atm) b0bb? insanity? chiguy? Report
February 22, 201511 yr Author comment_673918 i'm a maybe OK, but FYI I'm not counting the maybe's, as I have to get a quote to try and find the best price. If you decide to turn that to a yes then there may not be a spot for you folks. DefQon s_r Cucera Tachikoma mwl168 Gokury JimL (2) particleman14 G600 sorenb 14 boards total with three for me Maybe/Uncounted b0bb insanity chiguy mypasswordis Report
February 22, 201511 yr comment_673938 Same for me. If the cost is reasonable, I'm still in for a set. Report
February 23, 201511 yr comment_674003 Depending on price I may want more than one set. This. The end be all decision for me is *Drums rolling* The price for a set! Report
February 23, 201511 yr Author comment_674018 OK let's just make it simple, $90/board set, thats for a PSU and two amp boards, includes shipping and PayPal fees. Report
February 23, 201511 yr comment_674033 Sounds good, I've already collected about 1/2 of the parts. By the way, I should only be in for 1 board set. Report
February 23, 201511 yr comment_674035 Sorry I am out. Can't justify buying a backup set of boards at 90$. sorry. Report
February 23, 201511 yr comment_674073 I have been looking at Seeed (lately, I order from them) and the quote that I get for 15 units, 15cmx15cm maximun, 2 layer, 2 oz. is 121.23$, and 175.06$ for 30. So the total amount for 30 amp boards plus 15 PSU is 296.29$ (plus shipping). That is 19,75$/set of 2 amps + 1 PSU boards for a order of 15 sets. Report
February 23, 201511 yr Author comment_674075 I have been looking at Seeed (lately, I order from them) and the quote that I get for 15 units, 15cmx15cm maximun, 2 layer, 2 oz. is 121.23$, and 175.06$ for 30. So the total amount for 30 amp boards plus 15 PSU is 296.29$ (plus shipping). That is 19,75$/set of 2 amps + 1 PSU boards for a order of 15 sets. That's another option, feel free to go with them if you like. I tried their web interface and found glitches, not sure how comfortable I am doing a HV board set. It'd probably be fine though. I've been working with BayAreaCircuits which is a top drawer manufacturer, but costs a bit more too. Does it make any difference? Don't know. Anyhow Remold did you want to organize a run of cheaper boards through them? Report
February 24, 201511 yr comment_674159 It was intended as a small contribution for a informed decision. Report
February 24, 201511 yr comment_674163 Those prices look good remolon if you go forth with the GB. Report
February 24, 201511 yr comment_674164 I have been looking at Seeed (lately, I order from them) and the quote that I get for 15 units, 15cmx15cm maximun, 2 layer, 2 oz. is 121.23$, and 175.06$ for 30. So the total amount for 30 amp boards plus 15 PSU is 296.29$ (plus shipping). That is 19,75$/set of 2 amps + 1 PSU boards for a order of 15 sets. That's another option, feel free to go with them if you like. I tried their web interface and found glitches, not sure how comfortable I am doing a HV board set. It'd probably be fine though. I've been working with BayAreaCircuits which is a top drawer manufacturer, but costs a bit more too. Does it make any difference? Don't know. Anyhow Remold did you want to organize a run of cheaper boards through them? AFAIK there has been at least on run on KGSSHV PCBs from Seeds, has any reported problems with these? Report
February 24, 201511 yr comment_674175 That's another option, feel free to go with them if you like. I tried their web interface and found glitches, not sure how comfortable I am doing a HV board set. It'd probably be fine though. I've been working with BayAreaCircuits which is a top drawer manufacturer, but costs a bit more too. Does it make any difference? Don't know. Anyhow Remold did you want to organize a run of cheaper boards through them? Have you checked the copper thickness for bay area? I haven't seen an option to choose more than 1 oz from the times I've used them. Report
February 24, 201511 yr Author comment_674177 Have you checked the copper thickness for bay area? I haven't seen an option to choose more than 1 oz from the times I've used them. Hmm, no, but I'll check. Is a greater thickness preferred? Why? Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.