mypasswordis

BCP56 has a complement so there's no reason to do this.

Ran out of spares but there should be plenty of substitutes, BCP56 should work and mouser has hundreds of thousands in stock. Did you check Mouser? https://www.mouser.com/ProductDetail/Phoenix-Contact/5452258?qs=%2Fha2pyFaduhOh6w07UJSvZXaAYETWGY9mxlNZpKiRtk%3D

Check your PM

RIP

Wow that's really trippy. Looks thicker to me ?

Kerry's panel looks about twice as thick, see the one counterbored hole he didn't put the bolt in. Kerry, did you put a slot in on the other side for the PCB to fit through, or something? John's design looks good, too.

The panel is a lot more flexible in the middle than the corners, and the jacks are the only thing holding the PCB in place, which is pretty heavy with heatsinks. Just something to consider.

Not sure it's a good idea to countersink such thin panels (IIRC 0.09"?). I assume the panels have to be that thickness to fit the jacks?

JR "Hennything's possible" Smith As much as it pains me to say, Cavs should've won this one... Lebron almost beat four all stars, a fingernail in his eye, Hennything and Jordan Brickson, and some questionable officiating all by himself.

Probably going with architectural asphalt shingles, unless you think it's not a good idea. Do you recommend T style drip edge flashing over the standard ones? There's actually no gutter system, currently, though potentially I could put one in also.

Any recommendations on nailers and compressors for reroofing? My parents have needed a reroof going on three years now so it's long overdue, figured I might as well do it myself since it doesn't seem too hard (as long as I don't fall off). Also, is it worth it to apply a sealant/coating? If so, what kind?

Happy birthday!

Thanks, guys! And the shuffle off this mortal coil starts from birth so I would call the downhill momentum linearly cumulative.

Here's some more SNS material! One of the best with which to ponder existence.

Going to buzz off all my hair now, thanks!

Can't find the right bolts and screws as usual :/ next up are the heatsinks Oh yeah and I forgot, happy belated birthday to Kevin!

Where the earspeakers at, tho? :thinkinghandonchinemoji: :

As a bit of a counterpoint, I went to a Whole Foods the other day, which had a "Produce Butcher" and a "Cookie Bar". I couldn't find normal hot dog buns so had to make do with disgusting gluten free ones stored in a freezer... they were so crusty that they practically flaked apart when I tried to put the hot dogs in.

Great, it fits your theme then! I own a pair and wouldn't call them comfortable, but largely because that's just how supraaural headphones are in general. Otherwise, they are quite lightweight. What I don't like the most is the coiled cable that was so popular back then.

The Realistic Pro 30 could be considered the poster child for vintage orthodynamics, at least from wualta's orthodynamic roundup thread. Can't remember when it was produced off the top of my head, maybe late 70s?

What if you say Foucault three times and click your heels?

RIP, and RIP to all the people in Toronto, too what a terrible week

https://www.washingtonpost.com/news/post-nation/wp/2018/04/22/at-least-3-dead-several-wounded-in-waffle-house-shooting-near-nashville-police-say/?utm_term=.8d357a0f7ed1

Looking forward to impressions! Also kinda wish they improved more functional things like the headband and whatever was going on with the imbalance. Maybe they did do the latter with the stator update.