February 12, 201511 yr BTW, are the new amp boards going to have provision for substitutes for the (apparently) out of print 2SA1468s?
February 12, 201511 yr You mean the STN9360? Pretty sure that's always been an option on the kgst boards.
February 17, 201511 yr Author Hi Folks, I've been out with one of the nasty flues the last week. Will be getting a quote and pulling this together this week.
February 22, 201511 yr Author OK here's the tally so far, check if I have everybody interested DefQon s_r Cucera Tachikoma mwl168 Gokury JimL (2) particleman14 G600 sorenb 14 boards total with three for me With maybe's (I'm not counting in atm) b0bb? insanity? chiguy?
February 22, 201511 yr Author i'm a maybe OK, but FYI I'm not counting the maybe's, as I have to get a quote to try and find the best price. If you decide to turn that to a yes then there may not be a spot for you folks. DefQon s_r Cucera Tachikoma mwl168 Gokury JimL (2) particleman14 G600 sorenb 14 boards total with three for me Maybe/Uncounted b0bb insanity chiguy mypasswordis
February 23, 201511 yr Depending on price I may want more than one set. This. The end be all decision for me is *Drums rolling* The price for a set!
February 23, 201511 yr Author OK let's just make it simple, $90/board set, thats for a PSU and two amp boards, includes shipping and PayPal fees.
February 23, 201511 yr Sounds good, I've already collected about 1/2 of the parts. By the way, I should only be in for 1 board set.
February 23, 201511 yr I have been looking at Seeed (lately, I order from them) and the quote that I get for 15 units, 15cmx15cm maximun, 2 layer, 2 oz. is 121.23$, and 175.06$ for 30. So the total amount for 30 amp boards plus 15 PSU is 296.29$ (plus shipping). That is 19,75$/set of 2 amps + 1 PSU boards for a order of 15 sets.
February 23, 201511 yr Author I have been looking at Seeed (lately, I order from them) and the quote that I get for 15 units, 15cmx15cm maximun, 2 layer, 2 oz. is 121.23$, and 175.06$ for 30. So the total amount for 30 amp boards plus 15 PSU is 296.29$ (plus shipping). That is 19,75$/set of 2 amps + 1 PSU boards for a order of 15 sets. That's another option, feel free to go with them if you like. I tried their web interface and found glitches, not sure how comfortable I am doing a HV board set. It'd probably be fine though. I've been working with BayAreaCircuits which is a top drawer manufacturer, but costs a bit more too. Does it make any difference? Don't know. Anyhow Remold did you want to organize a run of cheaper boards through them?
February 24, 201511 yr I have been looking at Seeed (lately, I order from them) and the quote that I get for 15 units, 15cmx15cm maximun, 2 layer, 2 oz. is 121.23$, and 175.06$ for 30. So the total amount for 30 amp boards plus 15 PSU is 296.29$ (plus shipping). That is 19,75$/set of 2 amps + 1 PSU boards for a order of 15 sets. That's another option, feel free to go with them if you like. I tried their web interface and found glitches, not sure how comfortable I am doing a HV board set. It'd probably be fine though. I've been working with BayAreaCircuits which is a top drawer manufacturer, but costs a bit more too. Does it make any difference? Don't know. Anyhow Remold did you want to organize a run of cheaper boards through them? AFAIK there has been at least on run on KGSSHV PCBs from Seeds, has any reported problems with these?
February 24, 201511 yr That's another option, feel free to go with them if you like. I tried their web interface and found glitches, not sure how comfortable I am doing a HV board set. It'd probably be fine though. I've been working with BayAreaCircuits which is a top drawer manufacturer, but costs a bit more too. Does it make any difference? Don't know. Anyhow Remold did you want to organize a run of cheaper boards through them? Have you checked the copper thickness for bay area? I haven't seen an option to choose more than 1 oz from the times I've used them.
February 24, 201511 yr Author Have you checked the copper thickness for bay area? I haven't seen an option to choose more than 1 oz from the times I've used them. Hmm, no, but I'll check. Is a greater thickness preferred? Why?
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now