March 12, 200917 yr comment_213968 I'm trying to find some nice feet for my SS. Gold or brass is preferred, also big and chunky, maybe cones depending on design. Any good resources for nice feet.. obvious jokes aside Report
March 12, 200917 yr Author comment_214095 Shit, they're nice... and cost more than the SS! I may need to just buy some brass billet rod. Some gorgeous stuff there, thanks! Report
March 12, 200917 yr comment_214126 I think I read elsewhere about other like minded cheapskate audiophiles re purposing brass plumb weights/bobs for just this task, at a considerable saving. This sort of thing Amazon.com: Stanley 47-969 4-Ounce Brass Plumb Bob: Home Improvement Amazon.com: Stanley 47-973 8-Ounce Brass Plumb Bob: Home Improvement Report
March 12, 200917 yr Author comment_214160 Ah perfect, now we're in my territory I was just in amazon looking at brass weights. Report
March 12, 200917 yr comment_214195 Get four of those from here for $29.50 after shipping and cut up mouse pads underneath for floor discs as Amazon only has one left in stock under $4.87 before paying the $6.81 shipping. You may want to check out Parts Express too. They Dayton Speaker spike set also that looks professional and has metal floor discs included for $21 then four plumb bobs, but they are just over three ounces as the plumb bobs can be had. They also have Dayton isolation cones for $25.25 (no weight listed). Still have to add in shipping. Parts-Express.com - Search Results Parts-Express.com - Search Results Report
March 12, 200917 yr comment_214229 ...cut up mouse pads...First of all -- cool idea, hadn't heard that one before, I might have to try it. Secondly -- is that really enough? Probably for most gear, but for gear that isn't, one might consider embedding a coin between two pieces of cut up mouse pad. Or maybe a coin on the side which receives the pointy part of the brass foot, and mousepadding on the floor or shelf side. Report
March 12, 200917 yr Author comment_214242 Cool ideas guys. Those dayton gold spikes look like they'd do the job too. I only need two feet for the front, I'm going to rig a brass adjuster under the heatsink for the rear support. The amp is quite small so the biggest plumb bob I'd need is 4oz otherwise they're like 4" tall. I gotta go look for black plastic cases too as a bottom plate to make everything neat. I'm enjoying this way more than I thought I would Report
March 12, 200917 yr comment_214255 First of all -- cool idea, hadn't heard that one before, I might have to try it. Secondly -- is that really enough? Probably for most gear, but for gear that isn't, one might consider embedding a coin between two pieces of cut up mouse pad. Or maybe a coin on the side which receives the pointy part of the brass foot, and mousepadding on the floor or shelf side. You might want to use various grades. It seems to work for various people I've seen (including Jude). Report
March 12, 200917 yr Author comment_214259 I'll just file the points smooth on mine, not like it's gonna weigh much anyway and mine is purely for added sexy. Report
March 13, 200917 yr comment_214285 I recommend- The Madisound Speaker Components Store any of these, I think Parts Express sells some of these as well. If you want to get kinky with your SS, then you could try these- Studs And Spikes .com store One of the guys who built a BottleHead amp used the spikes listed here. Good luck. Report
March 13, 200917 yr comment_214437 Star Sound Technologies - Audio Points Did you look at the suggested prices on those? Actually, I think I may have 3 of those around, forget where I got them from. Smeggy: Partsconnexion is having a Bargain Basement sale on odds and ends they have laying around, and they do have some feet that sound like they would be nice. Go here and click on the bargain basement sale thing to grab a pdf of what they have. Some machined aluminum feet (sets of 4 for $2 or $5). Maybe something in there you might like, though they seem to lack the bling factor you seem to be seeking to emulate Report
March 13, 200917 yr Author comment_214454 they must color coordinate with the rest of the amp so bling is totally necessary, mandatory in fact. . Report
March 13, 200917 yr comment_214496 You wouldnt kill your only stalker!!! Gold paint + sparkles!!! THEN IT LOOKS BLINGIER!!! Report
March 13, 200917 yr Author comment_214501 Yeah, but then I'd need to add gemettes and before you know it, I'm knitting. Report
March 13, 200917 yr comment_214538 Smeggy: Can I take you up on that 6-pin Stax plug? It would be much appreciated! Report
March 13, 200917 yr Author comment_214543 sho fing, pm me your addy and I'll pop it in the mail. Report
March 14, 200917 yr comment_214684 So I ordered 4 of those 4 oz. plumb bobs. We'll see if they can be turned into decent feet. Report
March 14, 200917 yr comment_214714 oregondv.com/spikes.html some of the best pricing ive seen on spikes & seems to be of good quality used them on a pair of Lowther Acousta cabinets i built.... Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.