luvdunhill

Could you be persuaded to modify the board? Basically would need a SIP-10 pinout for the dual opamp and usual external resistors. Pinout would be: 1 - signal ground 2 - OUT_A 3 - -IN_A 4 - +IN_A 5 - -23V 6 - +IN_B 7 - -IN_B 8 - OUT_B 9 - +23V 10 - psu ground Drop-in replacement for something like NJM4558E, pin 1 and pin 10 are omitted (one of the advantages to a discrete opamp is handling ground properly/differently/carefully) http://akizukidenshi.com/download/NJM4558.pdf Also, would need to note changes to the external circuit for slightly higher rails.

I have a discrete opamp that is unity gain stable that sounds quite nice. Once you get this up and running and familiar with the sound, I would appreciate a comparison. Will send samples for positive review only though. K thx bye. Actually, it would be a PITA - mine are dual opamps on a single board. So, would probably need a new board.

I am in the same position Al, though still have a massive HP discount / FAN on my account. Consider me subscribed.

Mucked out an older high capacity smoker today. Yes, that is the proper verb. I am hesitant to buy another Maverick temperature probe system, as all of them have died. Any other recommendations?

Looks nice, but the depth is a bit non-standard. Does it stick out a bit from your cabinets in an annoying way?

Is the Wolf an integrated cooktop and oven? Looking for something like this as I can't really do the counter work to move to "separates".

Some drawers. I need to learn to use a router as the "pulls" came out inconsistent. I think a template and some skills could have made them better. Also rushed the finish which isn't visible here, but obvious if you look carefully in the right light.

Good show, old chap!

These work really well too, if you like using the Keystone jacks: https://www.amazon.com/gp/aw/d/B0012DMBGA/ref=yo_ii_img?ie=UTF8&psc=1

Oysters and Fries. Seems legit.

I would be willing to redo a board from scratch if you sent me a list of modifications (removing dual resistor pads, etc.) I should have time this summer and sounds like a fun project.

How else can they profit from the raffle then?

I need to get some servicing done myself. I mean, have someone else do the servicing. Yes, that too.

Q: FUCP? What does that mean? A: Elementary, my dear Watson.

Alone and Gluten-Free

Still interested in transformers.

I wouldn't use a hole saw. Maybe a sacrificial forstner bit - just don't let Steve know - and only on aluminum and even then it isn't safe. The punch can work to about 1/4" thick aluminum.

Head-Case sized box of cigars

Use a chassis punch, which is not cheap unless you find a used one.

It's posted on the first page of the "Babysitter construction help" thread.

Check out some recommendations Nelson Pass had on using fans, and a simple circuit to feed them at a very low level.

It's more like - did we break you guys when we rolled out that last change?

Nice! My team has been told that we are the biggest/most sophisticated power user of the Datadog platform

Same as new Esoteric stuff

I proxy to an AWS instance I pay for. Not worried about Google