luvdunhill

Alone and Gluten-Free

Still interested in transformers.

I wouldn't use a hole saw. Maybe a sacrificial forstner bit - just don't let Steve know - and only on aluminum and even then it isn't safe. The punch can work to about 1/4" thick aluminum.

Head-Case sized box of cigars

Use a chassis punch, which is not cheap unless you find a used one.

It's posted on the first page of the "Babysitter construction help" thread.

Check out some recommendations Nelson Pass had on using fans, and a simple circuit to feed them at a very low level.

It's more like - did we break you guys when we rolled out that last change?

Nice! My team has been told that we are the biggest/most sophisticated power user of the Datadog platform

Same as new Esoteric stuff

I proxy to an AWS instance I pay for. Not worried about Google

Yeah, same experience. At this point Google Fiber is about 5 blocks away. Just waiting for them to push a bit further South.

I would think TEK could be a good choice if we could find a way to get the shipping cost reasonable.

Link? Are you using both mods, or just the super duper resonator?

I might be interested in a set of transformers - if anyone decides to put together a group buy for those.

Aim to please. There is a lot of crap still coming out of Cuba. The large ring gauge movement is here to stay and long-skinnies aren't being rolled due to needing longer leaf. This year was the first time in a while Cuba had a double growing season. Hopefully in 2019 we will start to see the fruits of those labors.

Previously

Sad this marca (brand) is down to only one regularly produced size... La Gloria Cubana MdO 4

Basically ARC and Audessy (or similar tech) does the timing stuff automatically. Just connect the mic and do the impulse check and it works perfectly.

RA LE with various accoutrements Tough to break up the box

You can do the same thing with ARC. One (HDMI) cable from TV to receiver and either do the input switching at the TV or receiver. Either remote can be used for volume.

Sadly not pin compatible though

[emoji20] that circuit doesn't work. The first switch debounce output (U2) is high and then transitions to low when the momentary switch is pressed. This means U1 clear is always being asserted. What is the easy way to invert this logic? I still need half that switch to be NO for the logic that happens on the other side of H1. I suppose it's possible a half NO and half NC momentary switch might exist, but seems unlikely in the switch form factor I am using and commited to. I need to find a way to jumper U2 pin 1 and 3 and then test the other part of the circuit. Testing tiny SMD components on a dense board is hard [emoji20]

So, the numbers aren't too limited - in the grand scheme of things?