February 4, 20188 yr Author On 2/2/2018 at 11:55 PM, chiguy said: The last build I did used the Neutrik plastic A series XLR connectors and I think I used M3 screws. Whatever the thread was, I ended up tapping the XLR connectors myself. Added myself to the sheet for one of each. Thanks! And that puts us over 25. Price is now $8 cheaper
February 8, 20188 yr cspirou:Any idea on when you might move ahead on this?Also, will the vendor provide a proto case or sample? Not sure if they do this or not.Sent from my iPhone using Tapatalk
February 10, 20188 yr Author Short answer because I'm in the middle of a trip but no sooner then the 20th. I might tie the date with the PCB group buy so everyone has an opportunity to buy an enclosure
March 1, 20188 yr Any idea when you will close this GB? The amp boards are feeling naked... I know you wanted to wait for the board GB to end and sync with that, but by the looks of it, that one might be open for awhile...
March 1, 20188 yr Sorry Pars... We keep adding boards. I thinking we'll keep it open for another 3 weeks or so. I'll post in that thread in a few
March 1, 20188 yr Author There's a few details I wanted to finalize on my drawings first. However I won't be able to order until I have everyone's money which can take a little bit of time. I'll post soon with payment info.
March 6, 20188 yr Author Okay guys, about to start requesting payments. Before I do though i wanted to see if you guys were okay with a prototype enclosure to make sure everything fits? It will be a single order unanodized case and it would add $3 to the price of everyone's enclosure, plus I'll make this prototype case available for ~$50. On 2/28/2018 at 7:22 PM, sbelyo said: The cases are black right? Yes unless i get a significant number of people that want one other color
March 7, 20188 yr I think the prototype is probably a good idea unless you are satisfied with the design and are also convinced that the manufacturer will do everything as asked/requested. I'm good with the additional if you decide to get a prototype. These are still anodized after machining? Also, have you posted the final design? Thanks for all of your work on this!
March 7, 20188 yr Ok I’ll break, apologies I’m so late to the party I’m up for 2 Alpha cases, I’ll update the spreadsheet tonight, if that’s ok.
March 8, 20188 yr I broke for a second If an alternative colour does end up happening, I'd be keen for Silver anodize on both. Otherwise black is fine too. Sent from my LG-H930 using Tapatalk
March 8, 20188 yr Author We're at 35 enclosures now so I've added ~$3 to each enclosure to pay for a prototype. Don't want to risk having 35 useless enclosures. With that we can start payment. Please send the amount in the remainder column of the spreadsheet to my paypal address at . Send as friend or try to include fees. Include your head-case ID so I know who you are. I'll leave payments open for two weeks before I start submitting final orders. If I get everyone's money early then I'll start the order process sooner. Also know if you've dealt with me before that I am no longer in France so shipping will be from the USA this time. This shouldn't really matter to most of you. At the end of two weeks if I still don't have your payment I'll send a DM to bother you. I will order the prototype enclosure ASAP so that we aren't delayed. Any excess that you pay me will go towards shipping and unforeseen fees. If there is still some leftover I'll pay you back what's left. On 3/6/2018 at 6:24 PM, Pars said: I think the prototype is probably a good idea unless you are satisfied with the design and are also convinced that the manufacturer will do everything as asked/requested. I'm good with the additional if you decide to get a prototype. These are still anodized after machining? Also, have you posted the final design? Thanks for all of your work on this! Yep, still anodized after machining. The front and rear panel are near final for the cutouts. The Neutrik screws won't work with countersinking so they are just straight through holes. Might still countersink the screw for the RCA jack. The top and bottom panels have the vents overlapping with the sides so I'll need to adjust those a bit, but isn't that crucial since no components are getting mounted there.
March 8, 20188 yr Thanks Gael. Are the 4 corner screws going to be countersunk? Also, would you consider offering versions of the fronts/backs with countersunk screws for those of us who aren't going to use the Neutrik screws?
March 8, 20188 yr Author 1 hour ago, Pars said: Thanks Gael. Are the 4 corner screws going to be countersunk? Also, would you consider offering versions of the fronts/backs with countersunk screws for those of us who aren't going to use the Neutrik screws? I'll check for you. The corner screws are countersunk. I'm trying not to have a bunch of different versions because it could affect volume pricing. 29 minutes ago, arteom said: added my name, hope I'm not too late Not at all. As long as payment is before I submit the order then it's all good.
March 8, 20188 yr Author 3 minutes ago, MASantos said: paid. I forgot to add my username, sorry. I think I can figure it out
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now