April 28, 200818 yr comment_116745 So I was out doing errands yesterday and came across a garage sale with lots and lots of electronic stuff. Highly unusual. The guy's wife had recently passed away and he was getting rid of all of his collection over the years. Suffice it to say i bought one standard corvette's trunk worth of stuff, and will go back and get more today. Anyway he had these capacitors i had to have. He said they were for a top secret military project in the very early 1960's. There are no labels on the things, or they came off years ago. He said they were 1000 uf/5000 v caps. So i brought one into work and sure enough it really is almost exactly 1000 uf. He said they were teflon film caps. It weighs more than 20 lbs. Absolutely the perfect OTL output cap for dynamic headphones. Mikhail is going to need a bigger chassis. He had a total of a dozen of them... If i get the rest i'll send a pair to mikhail as a present. http://gilmore.chem.northwestern.edu/bigcap2.jpg Trying to find a ruler now, but my micrometer says its 7 inches in diameter. Report
April 28, 200818 yr comment_116746 that huge red cap and you getting your hands on more reminds me of something a bit like this... Report
April 28, 200818 yr Author comment_116749 Can't be a 5000 volt cap. That would be too much energy storage. Starts to spark at 1400 volts. So at a 1kv rating that is still 1000 joules. More than twice as much needed to stop your heart. Report
April 28, 200818 yr Author comment_116757 Without any manufacturer markings or any other information, figuring out the max voltage is tough. Could saw the thing in half and measure the thickness of the dielectric (not going to happen). Or try and guess what the hell someone would do with such a thing. 1) could be the output cap for a VLF transmitter. Just one would be good for 100kw. AM radio <1mhz possible... 1000 volts into 50 ohms... 2) could be the output cap for a very high rep rate xenon flash. after that i'm out of ideas. Report
April 28, 200818 yr comment_116805 Secret Military Project eh? I think Westwood went there. Actually, I'm gussing you're not far off the mark. Those are waaaay cool caps. I bet they cost thousands of dollars each. My guess would be some type of particle or laser weapon research project - or maybe even an electromagnetic gun. Both require massive peak currents. I worked at a particle accelerator for a while (another story) and to fire the linear accelerator we had banks of big caps... Pete Report
April 28, 200818 yr comment_116807 http://en.wikipedia.org/wiki/Coilgun http://en.wikipedia.org/wiki/Railgun Report
April 28, 200818 yr comment_116809 Given the size of it and knowing it was from the 60's i would say another 400 hours or so of burn in and it should really open up! Report
April 28, 200818 yr Author comment_116811 Given the size of it and knowing it was from the 60's i would say another 400 hours or so of burn in and it should really open up! I think you are right billy. Maybe i'll give one to ray and he can build it into a portable tomahawk. If he scales everything up to the size of the cap, it would be very impressive. And need a fork lift to move. Its not really the right form factor, so he will need two in series. Report
April 28, 200818 yr comment_116851 So was it still holding a charge before you connected it to anything? Report
April 28, 200818 yr comment_116877 Particle beam weapons obviously. I'm not sure I'd really want anything on my head that was connected to those, and I certainly wouldn't want to lug it around to meets! On the bright side, you can now say your amp is not only Mil Spec, but Top Secret Mil Spec. Report
April 28, 200818 yr comment_116881 And I thought these were big: 250uF polyprop soybean oil - 1000uF teflon film = Report
April 28, 200818 yr comment_116883 And I thought these were big: 250uF polyprop soybean oil - 1000uF teflon film = Oh but it's sooo pretty. I'd like one even if just to look at *sigh* Report
April 28, 200818 yr comment_116884 Sheesh! All I ever find at garage sales are Elvis paintings on velvet. Report
April 29, 200818 yr Author comment_117110 So was it still holding a charge before you connected it to anything? thats what the shorting wire is for. And after charging it and discharging it, and the shorting wire on for 4 hours, i took it off, and within minutes it was over 100 volts. Report
April 30, 200818 yr comment_117291 Oh my god... I want 4 so bad. Any chance you need a kidney Kevin? Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.