Well, I figured out the problem with the Bulova.
I haven't owned many quartz watches, and I initially didn't realize that there was a spacer under the crown to keep the watch from running. The Movado Museum 70th anniversary I bought for my wife didn't have this spacer, so I didn't expect it, and I couldn’t see it until I turned the watch over. Apparently this high-amplitude movement burns through batteries, so it makes sense that Bulova adds the spacer. Anyway, if you activate the chrono while the crown is extended, the chrono seconds hand will move a tick, and if you hit the chromo-reset, the split-seconds counter will as well. So, if you try to use the chrono function with the crown pulled out, you end up with a watch that doesn't reset to noon. I had done that a few times before I turned the watch over and noticed the spacer.
Resetting the movement just required pulling the crown out and pushing the chrono start pusher 250 or so times, to reset the main chrono seconds hand, and the chrono-reset pusher a couple dozen, to reset the running split-seconds dial. Not the end of the world, once I realized what had happened, and it's kind of nice that there is a way to adjust the hands, as I can certainly foresee an imbalance happening, over time, with a 262khz movement. I haven't read the manual yet, maybe this is even mentioned as a feature. The hour counter, fortunately, syncs straight to 0 upon chrono reset: that would be a real pain in the ass, if it didn't, as it would take pressing a button that would take approximately 16,000 times, otherwise.
The seconds sub-dial ticks (though at about three times the rate of a standard quartz), but the split-seconds and the chrono-seconds sweep more smoothly than any mechanical watch I've owned. When reset, the split-seconds and the chrono-seconds sweep through, instead of just going right back to noon, which is kinda cool. Dial legibility is very good. The lume is excellent, picking up a charge very quickly, and glows quite brightly. The lume is slightly tan, which avoids the overly dark brown "aged" luminova that is popular with reissue watches. I'm sure the lume will retain charge for a reasonable amount of time. The dial is very well printed, and the hands are uniformly painted and reach their respective chapter-rings, as they should.
Anyway, on the wrist, I really rather like it. It's very different from my other watches, but in a good way. It feels quite substantial, but comfortable. It's larger than my Speedy, but about the same thickness. The strap is very supple and comfortable, but isn't really a NATO strap. My guess is that I'll stick this on a real NATO, at some point. I have a knock-off Omega-style black with two-gray stripes, and black furniture, which would look quite nice. The case finishing is very uniform, and the curves are nicely radiused, which helps make the watch wear smaller than it is. The lugs being short, the tachymeter ( which is under the sapphire) being about the same diameter as a Speedy's and the fairly tight fit of the strap to the body also helps it wear smaller. I think the finish will look good with some "brassing." All-in-all, now that I have it resetting correctly, I'm quite happy, especially since I was able to get it for essentially free. My only real complaint, other than the NATO not being a real NATO, is the edge on the sapphire.