Good luck!

Just finished shoveling ~2' of snow off the deck, took about 2hrs. This is vacation?

Damn man. It sounds like you're shovelling everyday!

Nah I hadn't shoveled the deck in over a week, no time. Took a few pics for boomana since she's been nostalgic for snow.

Post pics!!!

It's 78 and sunny right now, but I'm headed off to work.

I've got work and snow. Woe is me.

Post pics!!!

As you wish.

New MDF boards cut, drilled, lightly sanded (not as much as I should've - I'm lazy), and first coat of Danish oil applied. I think I need to go get more Danish oil before I'm done.

Additional coats applied and drying. I might apply more Danish oil later, but I should be able to put the rack together sometime tomorrow. The oil doesn't look as uneven in person - camera's flash makes it more obvious.

Looks good... is that a DIY flexy rack?

Looks like it. I made a very similar rack, but I didn't go to those lengths to treat it...Salt Peanut's should turn out nicely

Yep, it's a Flexy - second one actually. It's time to put another coat on.

Woofer inversion, definitely -- they have a visible outward tilt on the bottom (well, the passive radiators do, anyway). I may just have to go for the mods, though, as the woofers are one of the standard mods.

I built a Dynalo for my brother for Christmas and just finished casing it up today, so thought I'd share some pics. I used the board from my work Dynalo and put a new board in it that I just built up with Roderstein/PRP resistors, Pana FM and Elna Cerafines, etc. I used some Mill-Max flush socket pins to socket all transistors and FETs also. Sorry bro... but that one is mine

Here's my new board:

And here is the amp for my brother (knob was one I had laying around, not my favorite... but whatever):

Hope he likes it!

Pars - I'm not seeing any pics.

Hmmm...

Probably comcast... someone told me awhile back they could see them as http instead of https, so I tried that. Apparently not...

https://home.comcast.net/~youngc1/My_dyna.JPG

https://home.comcast.net/~youngc1/My_dyna2.JPG

And here is the amp for my brother:

https://home.comcast.net/~youngc1/Fr_dyna_lit.JPG

https://home.comcast.net/~youngc1/Inside_rear_dyna.JPG

https://home.comcast.net/~youngc1/Rear_dyna.JPG

I can see the pics. I especially like the first hardcore porn shot.

I had a little bit of free time today so I decided to undertake the tedium that is matching all of the resistors for my balanced beta22. I guess this now officially qualifies as my next project.

Wow, Nate. You finally picked one of your many projects! Wuhoo!!!

Wow, Nate. You finally picked one of your many projects! Wuhoo!!!

I concur. Good to see you actually working on your own amp for a change.

I concur. Good to see you actually working on your own amp for a change.

I know, it can't last.

I know, it can't last.

Mike quickly thinks if there is anything he can ship to Nate that will distract him once again.

Mike quickly thinks if there is anything he can ship to Nate that will distract him once again.

Oh, I figure I'll be contacting you about something soon enough. I've got a certain email into Apogee...

I had a little bit of free time today so I decided to undertake the tedium that is matching all of the resistors for my balanced beta22. I guess this now officially qualifies as my next project.

I take it you picked up the HP3478 that was FS a bit ago? You get any kelvin leads for it? I've got a 3468B that I use and like alot. Built some 4-wire leads with some Mueller clips from Mouser and some banana plug test jumpers I had laying around... nice for matching resistors.

I take it you picked up the HP3478 that was FS a bit ago? You get any kelvin leads for it? I've got a 3468B that I use and like alot. Built some 4-wire leads with some Mueller clips from Mouser and some banana plug test jumpers I had laying around... nice for matching resistors.

I'm mad, but not quite that mad. I don't think you'll catch me doing 4-wire resistor matching any time soon.