jose
Returning Member
-
Joined
-
Last visited
Everything posted by jose
-
^ I have the original vinyl from '87. It was the first vinyl I had, a gift from my mother when I was just 10 years old and I released my first stereo. Over time I have been gathering different versions, both on cd and vinyl. I love that album and it means a lot to me (along with the "blood sugar sex magik" and the "seventh son of a seventh son")
-
A few minutes after work with the vertical drill...
-
-
CFAe runs hot, VERY hot. I would prefer a "normal" heatsink...
-
Thanks. Although the GRLV is very clean and stable, for preamps I prefer to use R-cores and easier to place in a single chassis since they do not electromagnetically interfere (or very little) with anything. It´s optional so you can perfectly use a toroid Now that I've seen the preview, it's been a little over a year since Dr. Gilmore sent me a design for a new buffer based on the CFA architecture. At the moment I have not been able to put it into operation. If confinement and anti-virus measures allow it this year I could have it ready.
-
Yes, this seller sells genuine sand. Highly recommended
-
yes... but is U2. You can see the three modules here
-
both are 2u (8cm) pesante Disspante
-
One of my wet dreams... Threshold 400s and SL10
-
I don't want to be rude or impertinent but please, use your browser and spend some time looking for the information. MODU
-
-
Yesterday I received a Proxxon 28566 base for mini tool (I normally use a dremel 4000 and a Bosch GRO12v-35) ). I thought it was better than the Dremel base, in fact Proxxon uses better materials and has a reputation for making high quality mini tools, but I was disappointed. Although the materials are much better than the Dremel (It´s made of aluminum and steel and Dremel use plastic), the guides are "crooked", so that when lowering and raising the tool, it is locked in any position. I have tried unscrewing the guides, but have not gotten a proper tool movement. I'm going to see how to modify it. 🙄
-
I usually use Modu boxes. They are expensive (I live outside the continent) but they do the job. That heatsink is overkill for a single CFA. Even for 2 CFA's they are still a bit oversized (BIAS 190mA). 24vDC power supply. Use OPA445.
-
Besides, there are also companies that close or go bankrupt... I have several grains of sand from Semisouth designed for use in solar panels/conversors AC/DC (and later on amplifiers obviously 😉) that today cost a small fortune.
-
Add to the list all the sand related to high voltaje. Who said that silicon was expensive?
-
There you can use anything that has a minimum value of 100V @ 2A
-
Something about some guys from Liverpool... do you know them?
-
BH Mini PSU Resistor Mouser P/N 100R 2 660-MF1/2CCT52R1000F / 273-100-RC 1.2K 2 660-MF1/2CC1211F / 273-1.2K-RC 330K 2 594-5093NW330K0J 3W L=20.5mm 430K 2 594-5093NW430K0J 3W L=20.5mm 4.7M 1 594-VR37000004704JR5 HV 1M 1 72-T93YB-1M Trimpot Semiconductor IXCP10M90S 2 747-IXCP10M90S * FQPF8N80C 2 512-FQPF8N80C * LM7815 1 512-LM7815CT / 863-MC7815ACTG * LM7915 1 512-LM7915CT / 863-MC7915ACTG * Zener 24V 2 78-BZX85B24 100V 2 625-Z4KE100A-E3/73 / 78-BZX85B100-TAP 100V*2+150V*1=350V 150V 4 625-Z4KE150A-E3 100V*1+150V*2=400V 1N4007 2 625-1N4007GP-E3/73 Capacitor 0.1uF/1KV 2 505-MKS4.1/1000/10 P=15mm 80-PHE426PB6100JR06 220uF/500V 4 598-80LX221M500K452 D=30mm * KX 80-ALC10A331CF450 470uF/35V 4 P=5mm/D=10mm FC KW Other GBU610 2 621-GBU610 / 625-GBU8M-E3/51 * 3N254 1 625-3N254-E4 / 625-2KBP10M-E4 * Heatsink Large 2 532-530002B02500G H=63.5mm * Heatsink Small 2 532-581202B25G H=50.8mm *
-
-
Fermented meat.
-
-
It had been a long time since I played with another of my favorite flight simulators. IL 2 Sturmovik It's a shame it doesn't have a clickable cockpit like DCS World. I spend hours flying the "Flying Circus" on the Fokker DR I with t he von Richthofen's red skin.
-
-
If you find a design, we'll talk and I'll do it for you . 😉
-
I really like using the HD800 with the Dynalo Bal ... I think it's a good combination
