luvdunhill

Yeah, same experience. At this point Google Fiber is about 5 blocks away. Just waiting for them to push a bit further South.

I would think TEK could be a good choice if we could find a way to get the shipping cost reasonable.

Link? Are you using both mods, or just the super duper resonator?

I might be interested in a set of transformers - if anyone decides to put together a group buy for those.

Aim to please. There is a lot of crap still coming out of Cuba. The large ring gauge movement is here to stay and long-skinnies aren't being rolled due to needing longer leaf. This year was the first time in a while Cuba had a double growing season. Hopefully in 2019 we will start to see the fruits of those labors.

Previously

Sad this marca (brand) is down to only one regularly produced size... La Gloria Cubana MdO 4

Basically ARC and Audessy (or similar tech) does the timing stuff automatically. Just connect the mic and do the impulse check and it works perfectly.

RA LE with various accoutrements Tough to break up the box

You can do the same thing with ARC. One (HDMI) cable from TV to receiver and either do the input switching at the TV or receiver. Either remote can be used for volume.

Sadly not pin compatible though

[emoji20] that circuit doesn't work. The first switch debounce output (U2) is high and then transitions to low when the momentary switch is pressed. This means U1 clear is always being asserted. What is the easy way to invert this logic? I still need half that switch to be NO for the logic that happens on the other side of H1. I suppose it's possible a half NO and half NC momentary switch might exist, but seems unlikely in the switch form factor I am using and commited to. I need to find a way to jumper U2 pin 1 and 3 and then test the other part of the circuit. Testing tiny SMD components on a dense board is hard [emoji20]

So, the numbers aren't too limited - in the grand scheme of things?

That Omega Railmaster will find its way to me at some point. With Omegas not holding their value extremely well on the used market, yet the relatively small number of these - recommendations on strategy to acquire?

It's just that those IR guns aren't that accurate even from a few inches away. They average the radius and that can skew the numbers. Anyways, I think something is amiss - but if you have checked it out, then just enjoy the sweet sweet music.

Can you place the gun physically touching the screw on the Cree device and read the temperature?

Cool. Then you need 4K support. Perhaps look at the NR series as well?

Perhaps one of the IXYS SSRs? http://www.ixysic.com/Products/SSRFormA.htm#Dual1FormA

You need something that supports ARC (Audio Return Channel) over HDMI.

Cool might mean it's not doing its job. How hot are the device fasteners after a few hours and the plastic package itself?

You really need wider L-brackets, though. The stick-on heatsinks won't do anything until they come off and rattle around inside the case and short something

2014 Cohiba Siglio 4

The pre-aged program by Cuba has been hit or miss and generally not received well by cigar nerds. Unless you believe that new boxes can be cherry-picked and compare with boxes left to rest for a while, the program is a good idea. I think this cigar suffers a bit from the rampant under-filling of cigars coming out of Cuba. Once the weather gets better, I will send you some interesting stuff. There are rumors of a gathering in Texas at some point as well. Funny - I have been wearing this watch non stop for more than a year now. I really enjoy it. That and I am too poor to consider anything new at the moment, including the blue-faced Milgauss which would be my likely choice.

HdM Hermosos No.4 Añejados (Pre-Aged Cuban)