March 17, 20206 yr comment_819050 I would like partially assembled boards for one set Thank you Report
March 18, 20206 yr comment_819123 Please increase my order of both GRLV78 and GRLV79 to 5. Also please add 2 bare GRHVs because they're cheap and why not. Report
March 18, 20206 yr comment_819173 Please increase my grlv78/79 to 6 each instead of 3 each. Thanks!!! Report
March 18, 20206 yr Author comment_819189 10 hours ago, Energy said: I would like one bare set please. Thank you! Please read the thread and be specific about which boards you want and how many. On 3/17/2020 at 12:12 AM, JoseA said: I would like partially assembled boards for one set Thank you Please be specific. Table updated. Edited March 18, 20206 yr by mwl168 Report
March 18, 20206 yr comment_819215 mwl168, I had a look at the bom for the gr78xx and tried to build a mouser project from it. However mouser says the kst42mtf is obsolete and out of stock. Also C3 C7 in the bom is the same as c1 and c2 but is on a seperate line... the gr79xx also uses the obsolete kst42mtf. the gr79xx also has two entries for the same cap, c1,c4 and the line c7. Ok looks like farnell still has some stock remaining.... Edited March 18, 20206 yr by jamesmking Report
March 18, 20206 yr comment_819221 Just to confirm that I would like what is listed against my name in the table. Thanks! Report
March 18, 20206 yr comment_819228 Hi sorry for the delay but quite busy down here curing people with that damn virus (not infected yet !!! thanks to my own protection hardware ....) i will double the order so 2 sets , that would be 4x GRHVxxx (assembled) 2x GRLV78xx 2x GRLV79xx 2x main board 2x mini t2 board Right ?and obviously i confirm the participation Report
March 18, 20206 yr comment_819233 Hi, Sorry, to be more precise: 2x GRHVxxx (assembled) 2x GRHVxxx. Bare 2x GRLV78xx 2x GRLV79xx 2x main board 2x mini t2 board Thanks Report
March 18, 20206 yr Author comment_819235 2 hours ago, jamesmking said: mwl168, I had a look at the bom for the gr78xx and tried to build a mouser project from it. However mouser says the kst42mtf is obsolete and out of stock. Also C3 in the bom is the same as c1 and c2 but is on a seperate line... the gr79xx also uses the obsolete kst42mtf. the gr79xx also has two entries for the same cap, c1,c4 and the line c7. C1, C2 and C3 are different values. A quick look seems CMPTA42 could be a pin/package compatible part for KST42. Same goes for the PNP part. Kerry and others should be able to confirm. Table updated. Edited March 18, 20206 yr by mwl168 Report
March 18, 20206 yr comment_819244 Apologies for not being accurate. 😅 I'd like the following: (enough for one Mini T2) 2x GRHVxxx (bare) 1x GRLV79xx 1x GRLV78xx 1x Main Board 1x miniT2 Report
March 19, 20206 yr comment_819291 2x mini T2 board 2x PSU main board 2x GRLV78 2x GRLV79 4x GRHVxxx (bare PCB) 2x GRHVxxx (partially assembled) Report
March 19, 20206 yr comment_819309 Please update my order. 4x GRHVxxx (assembled) 6x GRLV78xx 6x GRLV79xx 2x main board 1x mini t2 board Thanks Sam Report
March 20, 20206 yr comment_819380 On 3/18/2020 at 5:12 PM, mwl168 said: C1, C2 and C3 are different values. A quick look seems CMPTA42 could be a pin/package compatible part for KST42. Same goes for the PNP part. Kerry and others should be able to confirm. Table updated. I think I've used MMBTA42/92 in the past successfully, though your suggestion Michael looks like it should work as well. Report
March 20, 20206 yr Author comment_819425 We have a few new comers to HC (<= 10 posts) that participated in this GB and have not responded to my inquiries, including direct PM, for confirmation. We need final board counts to get accurate quotes from the fab house for this GB to proceed. The GB participants listed below please respond on this thread with your confirmation or desire to drop out by end of day this coming Sunday, March 22. If we do not receive your response , I will assume you are no longer interested and will remove you from the GB. Thanks! stickyjon23 grendel23 zumac99 Marc Edwards Edited March 20, 20206 yr by mwl168 Report
March 20, 20206 yr comment_819480 I am still in for: 4 ea. GRHVxxx partially assembled, 2 ea. GRLV78xx, 2 ea. GRLV79xx, 2 ea. main board, 1 ea. mini T2. Thanks, Jay Report
March 20, 20206 yr comment_819496 Hi Michael, hoping that I'm not too late, I would like to have 2x GRHVxxx 1x GRLV79xx 1x GRLV78xx 3x Main Board 3x miniT2 with much thanks! Report
March 21, 20206 yr comment_819537 Dear Michael, increase my GRLV78 XX, GRLV79xx numbers to 3 each from 2, please! Thanks!!, no more changes. Report
March 21, 20206 yr Author comment_819539 4 hours ago, Makoto said: Hi Michael, hoping that I'm not too late, I would like to have 2x GRHVxxx 1x GRLV79xx 1x GRLV78xx 3x Main Board 3x miniT2 with much thanks! Do you want the GRHVxxx partially assembled or bare boards? I assume you know the PSU Main board is designed specifically to work with the GRHVxxx boards? Each main board takes 2 GRHVxxx boards to supply a set of +/- HV rails. Edited March 21, 20206 yr by mwl168 Report
March 21, 20206 yr comment_819565 5 hours ago, mwl168 said: Do you want the GRHVxxx partially assembled or bare boards? I assume you know the PSU Main board is designed specifically to work with the GRHVxxx boards? Each main board takes 2 GRHVxxx boards to supply a set of +/- HV rails. It's good for newbie to have the advice. I'd take the bare boards, then 6x GRHVxxx3x GRLV79xx3x GRLV78xx3x Main Board3x miniT2 Thanks! Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.